Mackie TT24 Owner's Manual - 3.8

Mackie TT24 Digital  Live Console Owner’s Manual

Console Surface Controls

41

3.7.2

Group Assignment

Press and hold a GROUP ASSIGN/SELECT button and press the channel 

SELECT buttons to add/subtract channels from that Group. This method is 

used for all of the GROUP ASSIGN/SELECT buttons: Groups 1–8, L/R and 

CTR/Mono. 

The SELECT button for channels assigned to a group light when a GROUP 

ASSIGN/SELECT button is held down. 

A selected channel can also be assigned to groups by selecting GRP/AUX in the 

QuickMix area to view the Group/Aux parameters on the Touchscreen.

3.7.3

Group Parameter Control

Press a GROUP SELECT button to access that Group’s settings and controls 

from the QuickMix section just like an input channel.

3.8

Solo Area

The Solo area (Figure 3-9) has two buttons: CLEAR SOLO and PFL.

Figure 3-9 Solo area

3.8.1

CLEAR SOLO

Press this momentary button to clear any soloed channels. It lights yellow 

when any solo buttons are active as does the RUDE SOLO LED (Figure 3-5).

3.8.2

PFL

Activate this yellow backlit button so all soloed channels are PFL (pre-fader 

listen). Solo selections are AFL (after-fader listen) when the button is not lit.

V-POT

CONTROL

PFL

PAN

HPF

CLEAR

SOLO

TRIM

METERS

Clear Solo

PFL