Mackie TT24 Owner's Manual - 6.2

Mackie TT24 Digital  Live Console Owner’s Manual

Touchscreen and TT Control

66

6.2

Touchscreen Conventions

The Touchscreen uses knobs, buttons, and sub screens, each described in the 

following sections. The FILES menu is the same for all Touchscreens.

6.2.1

Touchscreen Knobs

NOTE:

The Touchscreen knobs cannot be touched and adjusted directly! They corre-

spond to the QuickMix rotary encoders below the Touchscreen.

Up to 12 Touchscreen knobs each with a function label and value field are 

available depending on the Touchscreen. The layout of these knobs corresponds 

to the QuickMix rotary encoders below the Touchscreen. Adjusting a QuickMix 

knob adjusts the corresponding knob’s parameter. If the Touchscreen has less 

then 12 parameters, the bottom row of QuickMix knobs is used first, followed 

by the middle and top rows. Figure 6-2 shows all three rows in use.

Each QuickMix knob can also activate a push button to toggle between two 

values related to its primary parameter. For example, the push button for a 

channel Aux Send toggles it between pre- and post-fader. The knob’s push button 

capability (not active for all encoders) is indicated by a white Touchscreen knob 

instead of the usual black (the bottom-left and right knobs in Figure 6-2).

Figure 6-2 6

-

Band EQ Touchscreen