Mackie TT24 Owner's Manual - 3.4
Mackie TT24 Digital Live Console Owner’s Manual
Console Surface Controls
32
3.3.7
AUX MODE
AUX MODE, the only blue button on the console, effectively turns the TT24
into a powerful, dedicated monitor mixer by using the 24 channel faders as
channel Aux sends and the four Group faders as Aux masters. Select an AUX
SENDS button (it flashes) and each channel fader is then used to control that
channel’s Aux send level.
In AUX MODE, the Group faders represent Aux Send masters 1–12 in three
banks:
Table 3-1 Group Faders control Aux Master Sends in AUX MODE
For example, if AUX SENDS 3 is selected, it flashes while AUX SENDS 1, 2,
and 4 are lit solid to show their masters are assigned to the Group faders. For
linked Aux sends, both AUX SENDS buttons flash when either button is
pressed while the other two in that bank are lit solid.
The TRIM, METERS, HPF, PAN, and AUX PAN buttons operate normally and
still change the function of the V-Pots.
GROUP ASSIGN buttons do not light in banks of four in AUX MODE. However,
pressing and holding a GROUP ASSIGN button still allows Group assignment.
NOTE:
See Group and Master Controls
on page 40
for information on the normal
operation of the Group faders.
3.4
QuickMix Area
The QuickMix area (Figure 3-5) consists of the Touchscreen, 12 push-button
rotary encoders and eight buttons. It also includes Snapshot control buttons,
RUDE SOLO LED, L/R and C/MONO meters, and the Engineer’s Utilities area.
Group Fader 1 Group Fader 2 Group Fader 3 Group Fader 4
AUX SENDS 1–4
1
2
3
4
AUX SENDS 5–8
5
6
7
8
AUX SENDS 9–12
9
10
11
12