NautiCharger PM-0600H User Manual - Safety Instructions
-2-
Safety Instructions
A. General Safety Precautions
A-1. Do not expose the Inverter to rain, snow, spray, bilge or dust.
To Reduce risk of hazard, do not cover or obstruct the
ventilation openings.
Do not install the Inverter in a zero-clearance compartment.
Overheating may result.
A-2.To avoids a risk of fire and electronic shock. Make sure that
existing wiring is in good electrical condition; and that wire size
is not undersized. Do not operate the Inverter with damaged or
substandard wiring.
B. Explosive Gas Precautions
This equipment contains components, which can produce arcs or
Sparks. To Prevent fire or explosion do not install in compartments
containing batteries or Flammable materials or in locations which
require ignition protected equipment. This includes any space
containing gasoline-powered machinery, fuel tanks, or joints, fittings,
or other connection between components of the fuel system.
C. Precautions When Working With Batteries
If battery acid contacts skin or clothing, wash immediately with soap
and water. If acid enters eye, immediately flood eye with running cold
water for at least 20 minutes and get medical attention immediately.
WARNING!
Before install and use Your Inverter, read the safety instructions.