NEC SL1100 User Manual - Before Using Your Terminal
1
Before using Your Terminal
…
Thank you for purchasing NEC SL1100 system.
Due to the flexibility built into the system, your Dialing Codes and Feature Capacities may differ
from those in this guide. Check with your NEC Authorized Supplier / System Administrator and
make a note of any differences.
Installing the Handset and Line Cord
When installing the handset :
1. Make sure the handset cord is plugged into
the handset jack on the telephone base.
2. The line cord is plugged into the LINE jack
on the telephone base.
3. The line cord routes through the channel on
the telephone base.
4. Headset is optional.
Handset Cord
Headset
Adjust the Viewing Angle and Height
To set the LCD viewing angle:
1. Pull the LCD as desired.
To set the leg height:
1. Adjust the legs to the desired height.
NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice.
NEC Corporation has prepared this document for use by its employees and customers. The information contained
herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC
Corporation.
Copyright 2015, NEC Corporation
Printed in Japan
Line cord