1. DL manuals
  2. NEC
  3. Touch terminals
  4. SL2100
  5. Quick Install Manual

NEC SL2100 Quick Install Manual

Summary of SL2100

  • Page 1

    The sl2100 quick install guide: multiline ip terminals www.Nec-enterprise.Com.

  • Page 2

    Quick install guide – sl2100 multiline ip terminals rev 1.1 2 nec sl2100 communication system quick start guide: multiline ip terminals dt820 phones (ity-6d/ity-8ldx) 8ipld desi-less phone note: for more information on your sl2100 communications system and nec multiline ip terminal, including quick ...

  • Page 3

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 3 this guide explains the installation, configuration and operation of the sl2100 multiline ip telephones. Further information for the sl2100 platform is available on businessnet. Please keep all information ...

  • Page 4

    Quick install guide – sl2100 multiline ip terminals rev 1.1 4 nec sl2100 communication system contents sl2100 multiline ip terminals ............................................................................................................................... 5 parts available for the sl2100 .........

  • Page 5

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 5 sl2100 multiline ip terminals the sl2100 system consists of a chassis unit with a dedicated slot for the cpu card and four universal slots for interface cards. Each universal slot supports an extension inte...

  • Page 6

    Quick install guide – sl2100 multiline ip terminals rev 1.1 6 nec sl2100 communication system parts available for the sl2100 not all parts are included within this guide, please refer to the other available sl2100 quick install guides or the sl2100 hardware manual for a full description and installa...

  • Page 7

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 7 2- features ip7ww-8ipld-c1 multiline ip terminal ity-6d-1 multiline ip terminal.

  • Page 8

    Quick install guide – sl2100 multiline ip terminals rev 1.1 8 nec sl2100 communication system ity-8ldx-1 multiline ip terminal.

  • Page 9

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 9 3- system connection overview the multiline ip terminals are connected via a poe switch. 4- connect the multiline ip terminal 1. Connect the lan network 10-base-t/100base-tx/1000base-tx cable to the lan(=) ...

  • Page 10

    Quick install guide – sl2100 multiline ip terminals rev 1.1 10 nec sl2100 communication system ethernet sockets for voip there are two ethernet sockets available with the sl2100: cpu card and optional voipdb card.  when the cpu card is installed – use the ethernet socket of the cpu. 8 voip resource...

  • Page 11

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 11 check the ip address of the sl2100 you can check the ip address at any sl2100 system phone: when the phone is idle (on hook) type-a terminal press the centre navigation key and dial 841 press the right nav...

  • Page 12

    Quick install guide – sl2100 multiline ip terminals rev 1.1 12 nec sl2100 communication system 6- ip7ww-8ipld-c1 desi-less ip terminal leg adjustment the multiline ip 8ipld terminal provides adjustable legs for angling the phone to best suit each user. The leg can be set for two different heights (l...

  • Page 13

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 13 high position setting 1. Turn telephone over (button side down). 2. Pull up the leg stoppers. 3. Adjust the legs to high position height. 4. Lead the line and handset cords through the applicable grooves. ...

  • Page 14

    Quick install guide – sl2100 multiline ip terminals rev 1.1 14 nec sl2100 communication system 7- dt820 ip terminal leg adjustment (ity-6d-1 and ity-8ldx-1) the multiline ip dt820 terminals provide adjustable legs for angling the phone to best suit each user. The leg can be set for two different hei...

  • Page 15

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 15 high position setting 1. Turn telephone over (button side down). 2. Pull up the leg stoppers. 3. Adjust the legs to high position height. 4. Lead the line and handset cords through the applicable grooves. ...

  • Page 16

    Quick install guide – sl2100 multiline ip terminals rev 1.1 16 nec sl2100 communication system 8- wall mounting multiline ip terminals 1. Arrange the cables and put down the legs as shown below. 2. Attach the ip4ww-wall mount unit to the bottom panel and arrange the cables as shown below. 3. Remove ...

  • Page 17

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 17 5. Mount the telephone on the wall..

  • Page 18

    Quick install guide – sl2100 multiline ip terminals rev 1.1 18 nec sl2100 communication system 9- multiline ip terminal configuration there are 3 types of registration methods that can be used to connect multiline ip terminals to the sl2100 system. The 3 methods available are as follows;  plug and ...

  • Page 19

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 19 dt820 terminals only an lldp discovery request is sent to the network and if supported by the network switch, configuration details of the network such as vlan and qos configuration can be obtained by the ...

  • Page 20

    Quick install guide – sl2100 multiline ip terminals rev 1.1 20 nec sl2100 communication system configure 8ipld multiline ip terminal 1. Once logged in successfully, the admin menu options will be available. 2. Press 2 to select sip settings and press the ok soft key. 3. The sip settings menu will no...

  • Page 21

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 21 5. The server address & uri menu will now be displayed. 6. Press 1 to select 1 st server address. 7. The 1 st server address data entry screen will now be displayed. Enter the voip ip address of the sl2100...

  • Page 22

    Quick install guide – sl2100 multiline ip terminals rev 1.1 22 nec sl2100 communication system 9. The sip server port menu will now be displayed. 10. Press 1 to select 1 st server port. 11. The 1 st server port data entry screen will now be displayed. The value should be 5080, if it is not, then ent...

  • Page 23

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 23 13. The terminal will now cycle through its boot procedure. Initializing > starting > dhcp connecting… > connecting… the connecting… phase is the terminal attempting to register at the sl2100 using the ip ...

  • Page 24

    Quick install guide – sl2100 multiline ip terminals rev 1.1 24 nec sl2100 communication system configure dt820 multiline ip terminals please note these screens are taken for the 8ldx model of dt820. The 6d configuration is identical to this procedure only the display is smaller on that model. 1. Onc...

  • Page 25

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 25 5. The server address & uri menu will now be displayed. 6. Press 1 to select 1 st server address. 7. The 1 st server address data entry screen will now be displayed. Enter the ip address of the sl2100 voip...

  • Page 26

    Quick install guide – sl2100 multiline ip terminals rev 1.1 26 nec sl2100 communication system 9. The sip server port menu will now be displayed. 10. Press 1 to select 1 st server port. 11. The 1 st server port data entry screen will now be displayed. The value should be 5080, if it is not, then ent...

  • Page 27

    Quick install guide – sl2100 multiline ip terminals rev 1.1 nec sl2100 communication system 27 13. The terminal will now cycle through its boot procedure. Initializing > starting > lldp receiving… > dhcp connecting… > connecting… the connecting… phase is the terminal attempting to register at the sl...