NovaTec S3 Installation Manual - page 25
Subject to change
Page 25 of 26
Version 2.2 / Date: Sept 2013
NovaTec Kommunikationstechnik GmbH
E-Mail:
info@novatec.de
Phone: +49 (0)5251 1589-610
Technologiepark 9 / DE-33100 Paderborn
Internet:
www.novatec.de
Telefax: +49 (0)5251 1589-611
8
Technical data
Mechanical Data
Width x Depth x Height
Desktop / wall-mounted chassis: 211 mm x 155 mm x 40 mm
Weight
1 to 2 kg (depending on version)
Fastening method
Wall-mounted chassis: wall holders
Construction
Several options
Electrical Data
Power Supply
90 to 264 V~ ; 47 to 63 Hz
Power Input
Max. 1 A at 230 V~
Electrical Supply
Rubber connector (IEC 320)
Overvoltage Protection
Internal overvoltage protection
Available Interfaces
(depending on version)
Serial via USB
1 x Ethernet according IEEE 802.3/802.3u
ISDN BRI, EDSS1
ISDN U
P0
, EDSS1*
Analogue*
BRI Interface
According CTR 3, TBR 3, ITAAB
Supply: external with USS (feeding unit)
Range: max. 220 m (passive bus)
max. 900 m (extended passive bus)
max. 1000 m (point-to-point)
Analogue Interface*
Automatic identification between IWV and MFV (ETSI Standards ETSI
ES 201 235-1,2 V1.1.1)
Range up to 10,000 m (depending on cable type)
High ringing voltage with up to 5 US REN (Ringer Equivalent Num-
ber) according AT&T / 125 V Peak ringing voltage and protection
from temperature rise
Adjustment of the line impedance for 15 countries (Austria, ..., Ger-
many, ..., USA)
Caller ID after Bellcore/Telcordia GR-30-CORE Bell202 FSK CID Cod-
ing and ETSI 300-659-1/2/3 V1.3.1 V.23 FSK Coding for transmission
of CID
Call charge pulse is 12/16 kHz configurable
Modem standards up to V.90
Fax standards up to V.34
Fax/Modem/Speech identification (Fax/Modem Switch)
IP Interface
SIP 2.0 RFC3261
ITU V.110 Data interface between ISDN, IP
TLS and sRTP
Clock Accuracy
Worst Case: +/- 30 ppm
Temp. Drift: +/- 30 ppm at -0°C to +70°C
Pull Range: +/- 100 ppm
Clock accuracy with RMCS option:
Long period (2 days) measurement:
+/- 0.5 ppm (5 * 10-7)
Worst Case and guaranteed:
+/- 5 ppm (5 * 10-6)