NovaTec S3 Installation Manual - page 26
Subject to change
Page 26 of 26
Version 2.2 / Date: Sept 2013
NovaTec Kommunikationstechnik GmbH
E-Mail:
info@novatec.de
Phone: +49 (0)5251 1589-610
Technologiepark 9 / DE-33100 Paderborn
Internet:
www.novatec.de
Telefax: +49 (0)5251 1589-611
Electrical Data
Encryption
SRTP according RFC3711 and RFC4711
(AES-CM-128 / HMAC-SHA1-32)
TLS Version 1.0 according RFC2246 and RFC3268
Key Agreement: RSA and Diffie Hellmann
Cipher Suite: AES, DES and 3DES
Certificate: X509v3
Hash Functions: SHA and MD5
Codec and Speech Compression
G.711 incl. Annex I (BFI) and Annex II (VAD/CNG)
G.726 incl. VAD/CNG, BFI error concealment and payload support
RTP according "RFC 3551"
G.728, 16 kbit/s
G.729 A/B, 8 kbit/s
Fax Relay, T.38 support V.21, V.27ter, V.29 and V.17
10, 20 and 30 ms Voice Packet size (all Codecs, upstream) configu-
rable
Adaptive/ Fixed Jitter Buffer maximal 200 msec
Jitter Buffer Inband Modem Support
RTP/SRTP Protocol Support according to RFC3550 and RFC3711
Payload Byte Counter (H248.1 Annex E)
X-CCD & Clear Mode for data transmission
Silence Compression
Comfort Noise Generation
Analogue Signalling
The Near Line Echo Canceller (16 msec) is compatible with applica-
ble ITU-T G.165 and G.168 standards.
Caller ID Sender (CIDS), V.23 and Bel202
Caller ID Receiver (CIDR), V.23 and Bel202
DTMF/AT Generator
DTMF Receiver (DTMFR) ) according to ITU-T Q.23.
Universal Tone Generator (UTG)
Universal Tone Detector (UTD) according to ITU-T V.8
Text Phone V.18 A Detector
Call Progress Tone Detector (CPTD)
Answering Tone Detector (ATD)
Digital Identification Signal (DIS) V.21 Detector
DTMF Event Support according to RFC2833
Environmental Specifications
Storage and Transport
-20° C to +90° C
0% to 95% relative humidity (not condensing)
Operation
+5° C to +40° C
0% to 95% relative humidity (not condensing)
Heat Loss
30 J
Max./Min. Temperature
0 to 40° C
*not available with TransNova
®
S3 (Cisco VG2-BRI-R)