Objet Alaris Preparation And Installation Manual - 4.4 Doors and Hallways
Alaris Site Preparation Guide
Objet Confidential and Proprietary Information
DOC-04002
12
Rev. C
4.2 Table Height & Strength
The height of the table should be 62–72 cm (2 feet to 2 feet, 4 inches). This
establishes a working height of 100–110 cm (2 feet, 3 inches to
2 feet, 7 inches).
The stand/table must be capable of carrying a load of at least 100 kg
(220 lb). For the weight of the printer, refer to Table 1, “Printer size and
weight,” on page 6.
The stand/table must be level.
4.3 Clear Space Above the Printer
A clearance of 60 cm (2 feet) must be maintained above the printer to
provide space for opening the top cover and for servicing.
4.4 Doors and Hallways
A minimum width of 65 cm (2 feet, 2 inches) is required for the Alaris
printer to pass through—90 cm (3 feet) when the shipping pallet is
included).
If the printer must be turned (for example, to enter a doorway), the
minimum hallway width required is 100 cm (3 feet, 4 inches).
Warning:
Four (4) people are required to lift the Alaris printer onto the table.