Objet Alaris Preparation And Installation Manual - 2.3 Start-Up Kit
Alaris Site Preparation Guide
Objet Confidential and Proprietary Information
DOC-04002
7
Rev. C
2.3 Start-Up Kit
The Alaris printer comes equipped with a start‐up kit, which includes
tools and accessories. These tools and accessories may be required during
the installation and are available for use by the customer.
It is recommended that the start‐up kit be stored near the Alaris printer.
The start‐up kit includes the following:
• Customer Tool kit—Allen keys, screwdrivers, a mirror, a scraper, a
spatula and a loupe for regular operation and maintenance. The
tools are kept in a special pouch.
• Consumable items—wiping cloths, pink paper, transparencies and
so on, to maintain the printer for approximately two years.
• Parts and accessories for emergency maintenance of the Alaris
system.
2.4 Noise Level
The noise level at a distance of 100 cm (39.4 in) from all sides of the Alaris
printer is lower than 70 dB while printing. Impact noise was not found.