Objet Alaris Preparation And Installation Manual - Copyright
Alaris Site Preparation Guide
Objet Confidential and Proprietary Information
DOC-04002
2
Rev. C
Copyright
Copyright © 2010 by Objet Geometries Ltd. All rights reserved.
This documentation contains proprietary information of Objet Geometries Ltd. This
information is supplied solely to assist Objet‐authorized personnel and customers of Alaris
3‐D printing systems. No part of this document may be used for other purposes, and it
may not be disclosed to other parties.
The specifications on which this document is based are subject to change without notice.
No part of this book may be reproduced in any form or by any means, nor stored in a
database or retrieval system, without prior permission in writing from Objet Geometries
Ltd.
March 2010
DOC‐04002 Rev. C
Trademarks
The following are registered trademarks of Objet Geometries Ltd.: Objet
®
, Fullcure
®
.
The following are trademarks of Objet Geometries Ltd.: Connex, Connex500, Connex350,
Alaris, Alaris30, Eden, Eden250, Eden260, Eden260V, Eden350V, Eden350, Eden500V,
PolyJet, PolyLog, Objet Studio, Job Manager, Tango, VeroBlue, VeroWhite, VeroBlack
TangoBlack, TangoGray, TangoPlus, Durus, DurusWhite, Digital Materials, Polyjet Matrix,
ObjetGreen and CADMatrix.
Microsoft and Microsoft XP are trademarks of Microsoft Corporation.
All names of products and services cited in this book are trademarks or registered
trademarks of their respective companies.