Objet Alaris Preparation And Installation Manual - 3 Shipment and Delivery
Alaris Site Preparation Guide
Objet Confidential and Proprietary Information
DOC-04002
8
Rev. C
3 Shipment and Delivery
3.1 Shipping Information and Responsibility
The Objet distributor will arrange shipment to the customer’s facilities, as
indicated in the “ship to” part of the invoice. It is the customer’s
responsibility to provide the distributor with detailed delivery
instructions. The customer is responsible for transporting the system to a
suitably prepared installation site. Objet‐certified Customer Support
Engineers will advise the customer on site preparation, upon request.
3.2 Shipping Pallets
The printer arrives on a wooden pallet. The pallet’s approximate size and
weight appear in the following table:
3.3 Equipment
It is recommended that a hand pallet truck with the following
specifications is available for printer installation:
• Capable of lifting 100 kg (220 lb)
• A 100‐centimeter (40‐inch) extension
Caution:
Equipment should be unpacked and installed by authorized Customer Support
Engineers only.
Unit
W × H × D (cm)
W × H × D (inch)
Weight (kg/lb)
Alaris
104 × 87 × 79
41 × 34.25 × 31
93 kg / 205 lb
Table 2: Shipping pallet size and weight
W = Width; H = Height; D = Depth.