Oce im3511 Operation Manual - Sending An Image
12
SENDING AN IMAGE
BASIC TRANSMISSION METHOD
1
Make sure the machine is in scanner
mode.
When the [IMAGE
SEND] key light is on,
the machine is in
scanner mode. If the
light is not on, press the
[IMAGE SEND] key.
Depending on the
feature to be used, touch
the [MODE SWITCH] key to select the E-MAIL/
FTP mode or the INTERNET-FAX mode.
2
Load the original.
For detailed information
on loading an original,
refer to page 4-3 of
"Copying operation
manual".
3
Check the original size.
The original size is
automatically detected.
If you loaded a non-
standard size document
or wish to change the
scanning size, touch the
[ORIGINAL] key and set
the document size.
(Refer to
page 20
.)
4
If needed, adjust the resolution setting.
(Refer to
page 23
.)
The initial factory setting
is “300x300dpi” (E-
MAIL/FTP mode) or
"STANDARD" (Internet-
Fax mode).
5
If needed, adjust the exposure setting.
(Refer to
page 23
.)
The initial factory setting
is "AUTO".
6
If needed, select the file format. (Refer to
page 24
.)
The initial factory setting
is "PDF MMR(G4)".
7
Touch the [SEND SETTINGS] key.
This step is not
necessary for Scan to
FTP or Scan to Desktop.
Go directly to step 18
(
page 14
).
*1 If the document filing functions are expanded.
*2 If the document filing functions are not expanded.
NOTE
You cannot load documents in both the automatic
document feeder and on the document glass and
send them in a single transmission.
NOTES
To scan a two-sided original (if a B/W scanner
module/DSPF is installed), refer to
page 19
.
To rotate the document image 90° before
transmission, see
page 20
.
ORIGINAL
300x300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO 8½
X
11
NOTES
You can skip the send settings (Proceed to step
18). If you skip these settings, the subject and the
file name that were set on the Web page and the
sender name that was set with the key operator
program (if the name is not registered, the default
is the administrator name for the Web page) will
automatically be used for transmission.
Subjects, file names, and senders are stored
using the Web page. Up to 30 subjects and file
names, and up to 999*
1
(500*
2
) senders can be
stored. You can input the subject and the file name
directly using the procedure on the
next page
.
ORIGINAL
300x300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
EXPOSURE
AUTO 8½
X
11
300x300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO
EXPOSURE
AUTO
8½
X
11
ORIGINAL
300x300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
EXPOSURE
AUTO 8½
X
11
ADDRESS ENTRY
SEND SETTINGS