Oce im3511 Operation Manual - Selecting The File Format
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)
24
For resolution other than [200x200dpi], the [HALF
TONE] key can be selected.
Internet-Fax mode
Five selections are available for the resolution.
Touch the desired resolution key depending on
the original to be scanned.
For resolutions other than [STANDARD], the
[HALF TONE] key can be selected.
3
Touch the [OK] key.
You will return to the
initial screen.
SELECTING THE FILE FORMAT
When you send an image to one or more recipients using Scan to E-mail or Scan to FTP, the [FILE FORMAT] key
enables you to temporarily override the individual file format settings (FILE TYPE / COMPRESSION MODE) stored
for each recipient and send the image to all of the recipients using a single file format setting.
"PDF MMR (G4)" is initially selected.
1
Touch the [FILE FORMAT] key.
2
Select the file type and the compression
mode.
(a) When the "SPECIFIED PAGES PER FILE"
checkbox is not selected, all scanned pages
are combined into a single file. When the
checkbox is selected, one file is created per
page from pages specified with.
(b) Touch the
or
key to set the number of
pages from which a file is created.
3
Touch the [OK] key.
You will return to the
initial screen.
AUTO
ORIGINAL
RESOLUTION
AUTO
EXPOSURE
STANDARD
FINE
SUPER FINE
ULTRA FINE
600x600dpi
READY TO SEND.
200x100
(
dpi)
200x200
200x400
600x600
400x400
HALF TONE
OK
NOTES
The initial factory resolution setting is 300x300dpi
(E-MAIL/FTP mode) or Standard (Internet-Fax
mode). If desired, you can change the initial
setting to a different setting using the key operator
program, "Initial resolution setting" (
page 55
).
When using the automatic document feeder, the
resolution setting cannot be changed once
scanning has begun.
HALF TONE
OK
ORIGINAL
300x300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
EXPOSURE
AUTO 8½
X
11
TIFF
MH
(
G3
)
MMR
(
G4
)
NONE
FILE TYPE
PROGRAMMED
(
1-99
)
RESEND
OK
SPECIFIED PAGES PER FILE
COMPRESSION MODE
300x300dpi
ORIGINAL
RESOLUTION
AUTO
EXPOSURE
FILE FORMAT
(a)
(b)
AUTO 8½
X
11
READY TO SEND.
NOTES
The initial file format setting can be changed with
the key operator program "Initial file format
setting" (
page 56
).
Even if you change the settings in the FILE
FORMAT setting screen, you can return to the
settings stored for each recipient by selecting
"PROGRAMMED" once again. The
[PROGRAMMED] key returns the file type to the
stored file format settings.
When you perform a broadcast transmission, the
compression mode selected in the key operator
program, "Compression mode at broadcasting"
(
page 56
), has precedence over the others.
MH
(
G3
)
MMR
(
G4
)
NONE
(
1-99
)
OK
PER FILE
COMPRESSION MODE