Octane Fitness PRO3700 Assembly Manual - page 13
13
13. Adjust levelers
a. Adjust the levelers to make sure the product sits flat on the
floor. begin by screwing all four levelers all the way into the
machine. if the floor is level, this should be sufficient. if there
is some uneveness in the floor, make minor adjustments to
the back levelers first to stabilize side-to-side motion, then
tighten the leveler nuts to the top of each back leveler to
lock.
b. Adjust the front levelers as necessary to eliminate any front-
to-back rocking. Tighten each leveler nut to the top of the
leveler to lock.
Note:
If you move your PRO3700, you may need to adjust
the levelers to make sure your product is level with
the floor.
Caution: If the unit is not level, it may not function
properly.
Front Levelers
Rear Levelers
14. Set user preferences
a. Press and hold both the up Arrow () and Down Arrow ()
keys for three seconds, or until you hear a double-beep.
Working with the owner of the unit, use the up Arrow ()
or Down Arrow () key to step through the customizable
functions: Warm-up (On/Off), clock Direction (up/Down),
max Workout time, unit type (english/metric), beep (On/
Off), and brightness. use the enter key to toggle through
the available options for each function, and press the up
Arrow () or Down Arrow () key to select a setting and
move to the next function. to exit without changing any
values, press Pause clear twice.
more detailed user set-up information can be found in the
PRO3700 Operations Manual.