Octane Fitness PRO3700 Assembly Manual - page 6
6
1. Attach right pedal lever
a. Remove bolt from 3-pivot link.
b. Attach right pedal lever (b) to 3-pivot link.
c. tighten the bolt and nut securely using 17mm socket and
wrench.
2. Attach moving handlebars—Moving handlebars are
labeled left and right, be sure to install accordingly.
a. Align the bottom of the handlebar with the four holes in the
pivot shaft and attach with four 6mm hex key bolts (K)—
make sure these bolts are very tight; torque to 30 ft-
lbs., making sure not to crush the cable connectors.
b. Reaching inside from the front of the machine, carefully
connect the heart rate and button cables coming from the
base of the handlebar (F or G) to the corresponding cables
by the pivot shaft. (the connectors are different so that each
cable can only be connected to the correct corresponding
cable.) Gently tug both cables to ensure the connectors
are completely seated.
c. Repeat for the other side.
Pivot shaft