Summary of C 9650dn

  • Page 1

    Hard disk drive (hdd) installation instructions 59375102.

  • Page 2: Trademark Information

    © 2007 by oki data americas, inc. All rights reserved. Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee tha...

  • Page 3: Prepare The Printer

    3 prepare the printer 1. Turn off the printer. 2. Detach the power cord from the back of the printer. 3. Detach the interface cable from the back of the printer. 4. Remove and save the thumbscrews at the top and bottom which hold the control board cover in place..

  • Page 4

    4 5. Open the control board cover by pulling out and to the left..

  • Page 5: Install The Hard Disk

    5 install the hard disk drive (hdd) 1. Locate the drive connector (1) on the control board:.

  • Page 6: Caution!

    6 2. Remove the hard disk drive from its shipping package. Caution! Observe antistatic precautions when installing the hard disk drive. 3. Lift the handle on the hdd and insert the connector firmly into the socket on the control board..

  • Page 7

    7 4. Press down on the handle to lock it in place..

  • Page 8: Complete The

    8 complete the installation 1. Close the control board cover and reinstall the screws at the top and bottom. 2. Reattach the interface cable, then the power cord. 3. Turn on the printer..

  • Page 9: Verify The Installation

    9 verify the installation print the configuration report 1. Press enter to access the printer menu. 2. Press enter to select configuration. 3. Press the ∇ key. 4. Press enter to select print information. 5. Press enter to select execute. The configuration report prints. 6. In the listing under confi...

  • Page 10: Activate The Hdd In The

    10 activate the hdd in the driver windows ® postscript emulation driver 1. First windows vista a. Click start → settings → hardware and sound → printer. The printer dialog box opens. Windows xp, server 2003 a. Click start → settings → printers and faxes. The printers and faxes dialog box opens. Wind...

  • Page 11: Pcl Driver

    11 5. Select installed. 6. Click ok and close the dialog box. Pcl driver 1. First windows vista a. Click start → settings → hardware and sound → printer. The printer dialog box opens. Windows xp, server 2003 a. Click start → settings → printers and faxes. The printers and faxes dialog box opens. Win...

  • Page 12: Macintosh

    12 macintosh ® mac os 10.2, 10.3, 10.4 1. First os 10.2 a. Activate print center: local hard drive → applications → utilities → print center. Os 10.3, 10.4 a. Activate the printer setup utility: local hard drive → applications → utilities → printer setup utility. 2. Highlight the printer name. Selec...