1 c7100/c7300/c7500/c9300/c9500 software installation guide h print a demo page................................................................................2 h which printer driver? ..........................................................................2 h installation network installation con...
2 to test the printer, print a demo page: □ press menu repeatedly until information menu appears. □ press item - repeatedly until demo1 displays. □ press select. The demo page prints and the printer goes back on line. Print a demo page readme file please refer to the readme file on cd1 for the lates...
3 ! No ethernet ® cable is supplied with the printer. Use an ethernet cable with two twisted wire pairs and an rj45 plug. □ turn the printer off. □ connect your ethernet cable to the network port on the print server (1). □ connect the other end of the cable to the network port (2). □ turn the printe...
4 important! In order to reduce electromagnetic interference—”noise” that interferes with tvs or other appliances—you must put the enclosed ferrite core on the network cable connected to your printer. This is required by the fcc. Here’s how to do it: □ disconnect the network cable from the printer, ...
5 windows ® network installation install printer software for tcp/ip ! Installing a printer on a network is best handled by someone familiar with networks (such as a network administrator). Tcp/ip configuration options for information on how to modify configuration settings specific to the tcp/ip pr...
6 activating the duplex unit, internal hard drive and 0ptional paper trays if your printer has a duplex unit or internal hard drive (standard on models c7100dxn, c7300dxn, c7500dxn, c9300dxn and c9500dxn) or optional paper trays, you must enter the driver and activate them. To activate in the postsc...
7 novell ® network installation install software for configuring the printer ! Installing a printer on a network is best handled by someone familiar with networks (such as a network administrator). ! The following procedure applies to novell netware 4.0 and 5.0 when using nds or bindery only. For fu...
8 ! No usb interface cable is supplied with the printer. Use a usb cable that is compatible with usb specification 1.1. Notes: • a usb interface will only operate using windows 2000, windows me and windows 98. It will not operate using ms-dos, windows 95, 3.1, or nt 4.0. • printer operation is not a...
9 usb install printer software for windows 98 install the postscript driver □ check that the usb cable is plugged in. □ turn the printer on. □ windows add new hardware wizard displays. Click next. □ select search for the best driver... Click next. □ insert cd1 into the cd-rom drive. □ select cd-rom ...
10 install the postscript driver □ check that the usb cable is plugged in. □ turn the printer on. □ found new hardware displays. □ insert cd1 into the cd-rom drive. □ select “install from a list or specific location...” uncheck search removable media. Click next. □ select “include this location in s...
11 usb install printer softwarefor windows 2000 install the postscript driver □ check that the usb cable is plugged. □ turn the printer on. □ found new hardware wizard displays. Click next. □ select “search for driver...” click next. Select “specify a location.” clear other selections. Click next. □...
12 usb install printer software for windows me install the postscript driver □ check that the usb cable is plugged in. □ turn the printer on. □ add new hardware wizard displays. Select “specify the location of the driver.” click next. □ insert cd1 into the cd-rom drive. □ select “specify a location....
13 □ turn off both the computer and the printer. □ attach a standard ieee-1284 parallel cable (not supplied) to the parallel port on the printer (1), securing it with the spring clips. □ attach the other end to the parallel port on the computer (2) and secure it in place with the screws. Local insta...
14 parallel install printer software drivers supplied the printer comes with two drivers: adobe postscript and pcl, for the following windows systems: • windows 2000 professional • windows me, 98, 95, xp • windows nt 4.0 □ insert cd1 into your cd-rom drive. The cd will autoplay. (if autoplay is set ...
15 network ! Requires mac ® os 7.X or above, running on a macintosh computer with ethertalk interface. The ethernet cable is not supplied with the printer. Use an ethernet crossover cable with rj45 connectors at either end important! Before connecting the network cable, install the ferrite core. See...
16 install the driver □ turn the printer on, then turn the computer on. □ place cd1, supplied with the printer, in the cd-rom drive. □ double-click the oki cd icon that appears on the desktop. □ open the mac folder. Click mac ® psdrv® english. □ double-click the mac installer icon, click continue. □...
17 on-line manuals requirements • microsoft internet explorer version 4.0 or higher and acrobat reader. To load the manuals ! In order to open the on-line manual, you must have acrobat reader installed. □ insert the cd into your cd-rom drive. □ from the cd contents folder, drag the manual folder to ...
18 macintosh ® installation install printer software for os x.1 install the driver ! Be sure to switch off antivirus software before installing a printer driver. □ turn the printer on, then turn the computer on. □ place the cd supplied with the printer in the cd-rom drive. □ double-click the oki cd ...
19 install the handy reference □ remove the backing from the velcro ® strip on the back of the handy reference and apply the handy reference to the printer..
20 service & support resources • my.Okidata.Com register your printer at my.Okidata.Com and get support, news and information, and the latest software upgrades for your printer. Get your own solutions specialist directly at my.Okidata.Com when you need assistance. • call 1-800-oki-data (1-800-654-32...