Oki MC160 User Manual - page 147
Scanning With the Machine
6-21
5
Press the or key to select the address to be deleted from the favorite
list, and then press the
S
TOP
/R
ESET
key.
6
Press the or key to select
YES
, and then press
E
NTER
key.
The selected address is deleted.
7
To delete another address, repeat the procedure from step 5.
8
To finish deleting addresses, press the
B
ACK
key.
9
Press the or key to select
FINISH
, and then press the
E
NTER
key.
Registering Speed Dial Destinations (Direct Input)
E-mail addresses can be registered as speed dial destinations. A maximum
of 250 speed dial destinations can be registered.
"
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with the Setup Utility.
"
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from the Setup Utility.
1
In the main screen (Scan mode), press the or key to select
UTIL-
ITY
, and then press the
E
NTER
key.
2
Press the or key to select
DIAL REGISTER
, and then press the
E
NTER
key.
3
Press the or key to select
SPEED DIAL
, and then press the
E
NTER
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the
E
NTER
key.
5
Press the or key to select
MANUAL SETTING
, and then press the
E
NTER
key.
"
If an LDAP server is not specified, step 5 is skipped.
6
Use the keypad to type in the registration name, and then press the
E
NTER
key.
"
For details on entering/editing text, refer to “Entering Text” on
"
A maximum of 20 characters can be entered.
7
Use the keypad to type in the e-mail address, and then press the
E
NTER
key.
The settings are registered, and the DIAL REGISTER menu appears
again.