Oki MC160 User Manual - page 242

Status, Error, and Service Messages

9-40

COMMUNICATION ERROR

USB Memory

While data was 

being sent in Scan 

mode, the connec-

tion to the USB 

memory device was 

interrupted.

Check the connection 

to the USB memory 

device, and then try 

sending the data 

again.

COMMUNICATION ERROR

xxx Server

While data was 

being sent in Scan 

mode, the connec-

tion to the server 

was interrupted.

Check the settings 

specified in the NET-

WORK SETTING and 

E-MAIL SETTING 

menus, and then try 

sending the data 

again.

DISCONNECT

USB Memory

The connection to 

the USB memory 

device was inter-

rupted.

Check the connection 

to the USB memory 

device, and then try 

sending the data 

again.

DISCONNECT

xxx Server

The connection to 

the server was inter-

rupted.

Check the settings 

specified in the NET-

WORK SETTING and 

E-MAIL SETTING 

menus, and then try 

sending the data 

again.

DESTINATION SET

BY MANUAL UP TO 16

There were more 

than 16 addresses 

found with an LDAP 

search.

Increase the number of 

entered characters, 

and then perform the 

search again.

I/C END

The time to replace 

the imaging car-

tridge has been 

reached.

Replace the imaging 

cartridge.

I/C LIFE END

REPLACE I/C

The time to replace 

the imaging car-

tridge has been 

reached.

Replace the imaging 

cartridge.

I/C LOW

The imaging  car-

tridge is nearly 

empty.

Prepare the imaging 

cartridge.

This message...

means...

Do this...