Oki MC160 User Manual - Printable Area
Printable Area
3-7
Printable Area
The printable area on all media sizes is
up to 4.0 mm (0.157") from the edges
of the media.
Each media size has a specific print-
able area (the maximum area on which
the machine can print clearly and with-
out distortion).
This area is subject to both hardware
limits (the physical media size and the
margins required by the machine) and
software constraints (the amount of
memory available for the full-page
frame buffer). The printable area for all media sizes is the page size minus
4.0 mm (0.157") from all edges of the media.
"
When printing in color on legal-size media, the following limitations
apply.
z
The printable area is 339.6 (13.4") mm from the leading edge of
the paper. (However, there is a non-printable area up to 4.0 mm
(0.157") from the leading edge.)
z
The bottom margin is 16.0 mm (0.63").
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to printable area constraints). If you can cus-
tom-size your page in your application, use those sizes given for the printable
area for optimum results.
a
a
a
a
Printable
Area