Oki MC160 User Manual - page 189

Cleaning the Machine

8-11

Cleaning the Media Feed Rollers for Tray 2

Be sure to remove the duplex option before cleaning the media feed rollers 

for Tray 2.

1

If the duplex option is installed, remove it.

"

If the duplex option is not installed and the locking pins are 

installed at the back of Tray 2, remove the locking pins (one in 

each opening on the left and right sides at the back of Tray 2).

To remove a locking pin, turn it to either the left or the right so that 

its grip is vertical, and then pull out the locking pin to remove it.

2

Remove the dust cover from Tray 1 and close the tray.

3

Lift the machine off of Tray 2 and 

temporarily place it on a sturdy 

flat surface.

4

Clean the media feed rollers by 

wiping them with a soft, dry 

cloth.