Oki MC160 User Manual - page 165
Other manuals for MC160:
User Manual, Software Installation
of
278
Replacing Consumables
7-9
14
Press in the toner cartridge until
it locks into place.
15
Close the front cover.
16
Press the
S
TOP
/R
ESET
key to reset the machine and clear the indicator
message.
"
The machine must complete a calibration cycle (less than 2 min-
utes) after a toner cartridge has been replaced. If you open the
scanner unit or front cover before the machine is reset, the calibra-
tion stops, then starts over again after the cover is closed.