Oki MC160 User Manual - Label

Print Media

3-5

DO NOT use thick stock that is

Mixed with any other media in the trays (as this will cause media misfeed-

ing)

Label

A sheet of labels consists of a face sheet (the printing surface), adhesive, and 

a carrier sheet:

The face sheet must follow the plain paper specification.

The face sheet surface must cover the entire carrier sheet, and no adhe-

sive should come through on the surface.

You can print continuously with label sheets. However, this could affect the 

media feed, depending on the media quality and printing environment. If 

problems occur, stop the continuous printing and print one sheet at a time.

Try printing your data on a sheet of plain paper first to check placement. 

Check your application documentation for more information on printing labels.

Use label sheets that are

Recommended for laser printing

DO NOT use label sheets that 

Have labels that easily peel off or have parts of the label already removed

Have backing sheets that have peeled away or have exposed adhesive

"

Labels may stick to the fuser, causing them to peel off and media 

misfeeds to occur.

Weight

Thick Stock 1: 91 to 163 g/m

2

 (25 to 43.5 lb bond)

Thick Stock 2: 164 to 209 g/m

2

 (43.6 to 55.6 lb bond)

Duplexing

Not supported

Capacity

Tray 1 

Up to 50 sheets, depending on their thick-

ness

Tray 2

Not supported

Orientation

Face up

Driver 

Media Type

Labels

Duplexing

Not supported