Oki MC160 User Manual - Enable
Configuration Menu Overview
2-35
SNMP
Setting
DISABLE
/
ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEX
Setting
AUTO
/
10BASE-T FULL
/
10BASE-T HALF
/
100BASE-TX FULL
/
100BASE-TX HALF
Specifies the transmission speed for the
network and the transmission method
for bi-directional transmission.
SETTING
SMTP
Setting
DISABLE
/
ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “
OKI-MC160n
”.
E-MAIL ADDRESS
Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
The default setting is blank.
DEFAULT SUB-
JECT
Specify the subject (up to 20 charac-
ters) of the E-mail message used for
network scanning.
The default setting is “
From
OKI-MC160n
”
.
SMTP SERVER
ADDR.
Specify the IP address or host name
(up to 64 characters) for the SMTP
server.
The default setting is “
0.0.0.0
”.
SMTP PORT NO.
Setting
1
to
65535
(Default:
25
)
Specify the port number communicating
with the SMTP server.