1. DL manuals
  2. Oki
  3. Printer
  4. MC770 series
  5. Maintenance Manual

Oki MC770 series Maintenance Manual

Manual is about: Controller Unit

Summary of MC770 series

  • Page 1

    Mc770 / mc770+ / mc780 / mc780+ mps3537mc / mps3537mc+ mps4242mc / mps4242mc+ maintenance manual (2 of 2) controller unit 051515b.

  • Page 2

    Copyright © 2013 by oki data. All rights reserved oki data america's, inc. ("oki data"), authorizes you to view, copy, and print documents published by oki data for noncommercial use within your organization only. In consideration of this authorization, you agree and acknowledge that any copy of the...

  • Page 3

    45584901th rev.1 ii / oki data confidential document revision history rev.No. Date corrected items person in charge no. Page description of change 1 2013-04-10 issue p2e1 t. Asaba.

  • Page 4

    45584901th rev.1 iii / oki data confidential trademarks • theofficialnameofwindows8ismicrosoftwindows8operatingsystem. • theofficialnameofwindows7ismicrosoftwindows7operatingsystem. • theofficialnameofwindowsvistaismicrosoftwindowsvistaoperatingsystem. • theofficialnameofwindowsxpismicrosoftwindowsx...

  • Page 5

    45584901th rev.1 iv / oki data confidential general precautions regarding the service for this equipment the installation and service shall be done by a qualified service technician. 1. Transportation/installation - when transporting/installing the equipment, employ two or more persons and be sure t...

  • Page 6

    45584901th rev.1 v / oki data confidential 2. General precautions at service - be sure to turn the power off and unplug the power cable during service (except for the service should be done with the power turned on). - unplug the power cable and clean the area around the prongs of the plug and socke...

  • Page 7

    45584901th rev.1 vi / oki data confidential 4.Cautionarylabels - duringservicing,besuretochecktheratingplateandcautionarylabelstoseeifthereis anydirtontheirsurfaceandiftheyareproperlystucktotheequipment. [1] [1] identification label 5.Disposaloftheequipment,supplies,packingmaterials,usedbatteriesand...

  • Page 8

    45584901th rev.1 vii / oki data confidential allegemeine sicherheitsmassnahmen in bezug auf die wartung die installation und die wartung sind von einem qualifizierten service- techniker durchzuführen. 1. Transport/installation - das tragen oder installieren des gerätes braucht wenigstens zwei mensch...

  • Page 9

    45584901th rev.1 viii / oki data confidential 2.Allgemeinesicherheitsmassnahmeninbezugaufdiewartung - während derwartung das gerät ausschalten und das netzkabel herausziehen (ausser wartung,diebeieinemeingeschaltetengerät,durchgeführtwerdenmuss). - das netzkabel herausziehen und den bereich um die s...

  • Page 10

    45584901th rev.1 ix / oki data confidential 4.Warnetiketten - im rahmen der war tung unbedingt das leistungsschild und die etiketten mit warnhinweisen überprüfen [z. B. „unplug the power cable during service“ („netzkabel vor beginn derwartungsarbeiten abziehen“), „caution. Hot“ („vorsicht, heiss“), ...

  • Page 11

    45584901th rev.1 x / oki data confidential contents 1. Specifications/system list .................................................................. 1-1 1.1 specifications ........................................................................................ 1-1 1.1.1 general ........................

  • Page 12

    45584901th rev.1 xi / oki data confidential 3.13 listprintmode(9s) ............................................................................ 3-32 3.13.1 operation procedure ..................................................................................... 3-32 3.13.2 listprinting ................

  • Page 13

    45584901th rev.1 xii / oki data confidential 4.4.14 jpeg compression level adjustment ............................................................ 4-30 4.4.15 color conversion table selection ................................................................... 4-30 5. Error code and troubleshooting ....

  • Page 14

    45584901th rev.1 xiii / oki data confidential 6.2.3 precautions and procedures when replacing the hdd ................................. 6-11 6.2.4 precautions and procedures when replacing the cu board ......................... 6-16 6.2.5 precautions and procedure when replacing the sram board (for ...

  • Page 15

    45584901th rev.1 xiv / oki data confidential 9.1.3 backup files..................................................................................................... 9-2 9.1.4 cloning procedure .......................................................................................... 9-2 9.2 aes data...

  • Page 16

    45584901th rev.1 1-1 / oki data confidential 1. Specifications/system list 1.1 specifications 1.1.1 general memory (ram) main memory 2 gb (including page memory) page memory included in main memory hdd 160 gb account codes 10000 codes department codes 1000 codes machine version oda:us,canada,la oel:...

  • Page 17

    45584901th rev.1 1-2 / oki data confidential 1.1.2 hdd memory map category item unit hdd hdd hdd gb 160 copy memory copy gb 30 box e-filing gb 80 (shared with e-filing/strage file) public box box 1 user box box 200 folders per box folder 100 documents per box document 400 pages per document page 200...

  • Page 18

    45584901th rev.1 1-3 / oki data confidential 1.2 system list inner finisher 45372301 (mj-1038) spacer 45479101/oel, aos 45479102/oda option-tray 45466501/oda 45466502/oel, aos (n31440a) large capacity feeder (lcf) 45393301/oda 45393302/oel, aos (n31450a) caster stand 45466601/oda 45466602/oel, aos f...

  • Page 19

    45584901th rev.1 2-1 / oki data confidential 2. Disassembly and replacement 2.1 removal and installation of options important: • before installing or removing options, turn the main power switch off and disconnect the power cable from the outlet. 2.1.1 inner finisher (mj-1038) (1) press the [power] ...

  • Page 20

    45584901th rev.1 2-2 / oki data confidential (6) take off the connector cover. Fig. 2-3 (7) disconnect the connector. Fig. 2-4 (8) remove 2 screws and take off the finisher. Fig. 2-5.

  • Page 21

    45584901th rev.1 2-3 / oki data confidential 2.1.2 fax unit (gd-1340) refer to p.6-7“6.1.6faxunit”. 2.1.3 option-tray (1) press the [power] button on the control panel to shut it down. (2) turnthemainpowerswitchoftheequipmentoff. (3) disconnect the power cable. (4) remove 2 screws and take off 2 fi...

  • Page 22

    45584901th rev.1 2-4 / oki data confidential 2.1.4 caster stand (1) press the [power] button on the control panel to shut it down. (2) turnthemainpowerswitchoftheequipmentoff. (3) disconnect the power cable. (4) release the lock. Fig. 2-8 (5) remove 2 screws and take off 2 fixing brackets. Fig. 2-9 ...

  • Page 23

    45584901th rev.1 2-5 / oki data confidential 2.1.5 spacer (1) press the [power] button on the control panel to shut it down. (2) turnthemainpowerswitchoftheequipmentoff. (3) disconnect the power cable. (4) remove 2 screws and take off 2 fixing brackets. Fig. 2-11 (5) lifttheequipmentupandremovethesp...

  • Page 24

    45584901th rev.1 2-6 / oki data confidential 2.1.6 offlinestapler (1) press the [power] button on the control panel to shut it down. (2) turnthemainpowerswitchoftheequipmentoff. (3) disconnect the power cable. (4) take off the right side cover. p.6-1“6.1.1rightsidecover” (5) take off the cu board c...

  • Page 25

    45584901th rev.1 3-1 / oki data confidential 3. Self-diagnostic mode 3.1 overview [a] starting each mode to enter the desired mode, turn the power on while pressing two digital keys designated to each mode (e.G. [0] and [5]) simultaneously. Hold the two keys until the [data] lamp is lit. Ontheauthen...

  • Page 26

    45584901th rev.1 3-2 / oki data confidential note: do not enter any of the modes shown below since they are provided only for production. If you doso,theequipmentmaynotberestarted. [2]+[clear]+[power] [7]+[clear]+[power] [8]+[clear]+[power] [9]+[clear]+[power] [d] state transition diagram of self-di...

  • Page 27

    45584901th rev.1 3-3 / oki data confidential • testmode(03) refer to p.3-7“3.3inputcheck(testmode03)”andp.3-8“3.4outputcheck(testmode 03)”. • testprintmode(04) refer to p.3-9“3.5testprintmode(testmode04)”. • adjustmentmode(05) refer to p.3-10“3.6operationprocedureinadjustmentmode(05)”,p.3-12“3....

  • Page 28

    45584901th rev.1 3-4 / oki data confidential • passwordresetmode(489) this mode resets the administrator password and service password. The user data is erased when resetting the passwords. Operation procedure [4][8][9] [power] (operation started) [power] off/on (exit) • sramdatacloningmode(59) refe...

  • Page 29

    45584901th rev.1 3-5 / oki data confidential 3.2 service ui 3.2.1 overview the following self-diagnostic modes can be used with service ui on the touch panel of the control panel. • 05adjustmentmode • 08settingmode • faxlistprintmode • chartprintmode 3.2.2 loginprocedure [1] in the normal mode (1) t...

  • Page 30

    45584901th rev.1 3-6 / oki data confidential [2] in the security mode ifthesecuritymode(thevalueof08-8911is“3”)isset,logintoserviceuifollowingthesteps below. (1) turn the power on. (2) enter the user name and password on the user authentication screen. The password needs to be changed to log in for ...

  • Page 31

    45584901th rev.1 3-7 / oki data confidential 3.3 input check (test mode 03) thestatusofeachinputsignalcanbecheckedbypressingthe[fax]button,[copy]button, [scan] button and the digital keys in the test mode (03). [0][3] [power] [start] [digital keys] [clear] (lcd on) [power] off/on (exit) [clear] [fax...

  • Page 32

    45584901th rev.1 3-8 / oki data confidential 3.4 output check (test mode 03) status of the output signals can be checked in the test mode 03. Procedure 1 [0][3] [power] [power] off/on (exit) [start] (code) operation on stop code operation off [start] procedure 2 [0][3] [power] [power] off/on (exit) ...

  • Page 33

    45584901th rev.1 3-9 / oki data confidential 3.5 test print mode (test mode 04) the embedded test pattern can be printed out in the test print mode (04). [0][4] [power] [power] off/on (exit) (code) (media selection) [start] [clear] operation continuous test printing [0][4] [power] [power] off/on (ex...

  • Page 34

    45584901th rev.1 3-10 / oki data confidential 3.6 operation procedure in adjustment mode (05) procedure 1 [0][5] [power] [power] off/on (exit) [digital key] (code) [start] [cancel] [digital key] * [reset] (key in a value) [clear] (corrects value) [ok] or [interrupt] (stores value in ram) [fax] [star...

  • Page 35

    45584901th rev.1 3-11 / oki data confidential procedure 7 [0][5] [power] [power] off/on (exit) [digital key] (code) [digital key] (sub code) [clear] (corrects value) [start] [start] *[cancel] or [clear] [cancel] [fax] [start] (test copy) [ok] stores value in ram automatic adjustment * whentheautomat...

  • Page 36

    45584901th rev.1 3-12 / oki data confidential 3.7 test print pattern in adjustment mode (05) operation: onetestprintisprintedoutwhenthe[fax]buttonispressedafterthecodeiskeyedinat standby screen. Code types of test pattern remarks 4 copier gamma adjustment pattern (color & black integrated / all medi...

  • Page 37

    45584901th rev.1 3-13 / oki data confidential code types of test pattern remarks 91 printer gamma correction table confirmation pattern (thin paper/ps/600dpi) refer to 4.3.1automatic gamma adjustment 200 copier gamma adjustment pattern (color & black integrated / plain paper) refer to 4.2.1automatic...

  • Page 38

    45584901th rev.1 3-14 / oki data confidential code types of test pattern remarks 238 copier gamma adjustment pattern (thick paper 2 / ps / 1200dpi) refer to 4.3.1automatic gamma adjustment 239 copier gamma confirmation pattern (thick paper 2 / ps / 1200dpi) refer to 4.3.1automatic gamma adjustment 2...

  • Page 39

    45584901th rev.1 3-15 / oki data confidential code types of test pattern remarks 283 printer gamma correction table confirmation pattern (special paper 5 / ps / 600dpi) refer to 4.3.1automatic gamma adjustment 284 printer gamma correction table creation pattern (special paper 6 / ps / 600dpi) refer ...

  • Page 40

    45584901th rev.1 3-16 / oki data confidential 3.8 operation procedure in setting mode (08) procedure 1 (stores value in ram) [0][8] [power] [power] off/on (exit) [digital key] (code) [start] [digital key] *[reset] [ok] or [interrupt] sets or changes value [clear] (corrects value) [cancel] * press [r...

  • Page 41

    45584901th rev.1 3-17 / oki data confidential procedure 9 [0][8] [power] [power] off/on (exit) [digital key] (code) [select button] [start] [cancel] [ok] or [interrupt] [clear] (corrects value) (stores value in ram) procedure 10 [0][8] [power] [power] off/on (exit) [digital key] (code) [digital key]...

  • Page 42

    45584901th rev.1 3-18 / oki data confidential 3.9 assist mode (3c) 3.9.1 general description thisisamodetooperatethepartitionsofhdd,initializethesramdata,erasethehdd/sram data,backup/restoretheencryptionkeyandlicences. Functions: • clearingupdateerrorflag(clearerrorflaginsoftwareinstallation) • form...

  • Page 43

    45584901th rev.1 3-19 / oki data confidential [c] creating hdd partition (format hdd) whenthehddisreplacedoruidata,etc.Aredownloadedusingtheusbstorage,itis necessarytoformatapartitioninthehddbeforedownloading.Inthiscase,thepartitionis created in the hdd with this function. Notes: • when downloading ...

  • Page 44

    45584901th rev.1 3-20 / oki data confidential [f] erasing hdd securely (erase hdd securely) this function is used when installing data overwrite enabler (gp-1070) or before discarding thehdd.Itoverwritesalltheusedareasonthehddwiththeselecteddata,andmakesit unusable. Afterselectingthisfunction,specif...

  • Page 45

    45584901th rev.1 3-21 / oki data confidential 3.10 hdd assist mode (4c) 3.10.1 general description thismodeisavailableonlywhenthesecurityhdd(adi-hdd)ismountedintheequipment.It enablesyoutocheckthetypeofthemountedhdd,reverttheadi-hddtothefactorydefaultor remove keys. Functions • checksthetype(adiorsa...

  • Page 46

    45584901th rev.1 3-22 / oki data confidential • whenanormalhddismounted hdd assist mode current hdd type: sata hdd select number (1-2) and press start key 1. Revert factory initial status hdd 2. Remove key system firmware version update mode : xxxx(x.X.X.X) : 4c mode fig. 3-8 remarks: ifthehddtypeca...

  • Page 47

    45584901th rev.1 3-23 / oki data confidential 3.10.3 functions [a] 1. Revert factory initial status hdd selectthistodisposeoftheadi-hddaswellastheequipment. Whenthisitemisselected,alldatainthehddaredeletedandthehddisrevertedtoits initial status at the factory shipment. Thisoperationrequiresonlyafews...

  • Page 48

    45584901th rev.1 3-24 / oki data confidential [b] 2. Remove key selectthistoreusetheadi-hddaswellastheequipment. Whenthisitemisselected,allimagedatainthehddaredeleted. Thisoperationrequiresapprox.20minutessincethepartitionmustberebuilt. When“2”isselectedandthen[start]buttonispressed,themenubelowappe...

  • Page 49

    45584901th rev.1 3-25 / oki data confidential 3.11 file system recovery mode (5c) 3.11.1 overview this is a mode to check if there is any damage to the file system (hdd) and recover it if necessary. Use this mode only in the following cases:. • thereisapossibilityofdamagetothefilesystem(hdd). • ther...

  • Page 50

    45584901th rev.1 3-26 / oki data confidential 3.11.3 functions [a] check of the file system (check f/s) in case that particular service calls occur or there is a possibility of damage to the file system,thestatusofeachpartitioninthehddcanbechecked. File system(f/s) recovery mode -> check f/s please ...

  • Page 51

    45584901th rev.1 3-27 / oki data confidential [c] initialize the file system (initialize hdd) in case that an error occurs during the file system check and the partition cannot be recoveredwiththerecovery,eachpartitioncanbeinitialized. It is recommended to export the user information such as address...

  • Page 52

    45584901th rev.1 3-28 / oki data confidential [d] initialize the db (initialize db) in case that particular service calls occur or there is a possibility of damage to the databases,eachonecanbeinitialized. File system(f/s) recovery mode -> initialize db please select partition 0: main menu 1. Ldap d...

  • Page 53

    45584901th rev.1 3-29 / oki data confidential [f] displaying usage rate of each partition (disk info) the usage rate of each partition can be checked. Whenthisitemisselected,theusagerateofeachpartitionisdisplayed. File system(f/s) recovery mode -> disk info 0: main menu all(mbyte) 8737 10326 3099 10...

  • Page 54

    45584901th rev.1 3-30 / oki data confidential 3.12 sram clear mode (6c) 3.12.1 general description this is a mode in which you can clear particular errors such as f800 or f900 without entering a service technician password. For example, when sys-sram is in an abnormal status or needs replacement but...

  • Page 55

    45584901th rev.1 3-31 / oki data confidential 3.12.3 functions [a] 0. Set serial number whenreplacingsys-sram,selectthistosettheserialnumberoftheequipmentsinceit must be done in advance of recovery from sram backup data. •clearsramfirstandthensettheserialnumberinthismode. •recoverfromsrambackupdataa...

  • Page 56

    45584901th rev.1 3-32 / oki data confidential 3.13 list print mode (9s) 3.13.1 operation procedure [1] print out [9][start] [power] (code) 101: adjustment mode (05) 102: setting mode (08) (code) 106: error history (maximum 1000 items) 107: error history (latest 80 items) 108: firmware update log (ma...

  • Page 57

    45584901th rev.1 3-33 / oki data confidential 3.13.2 listprinting listsbelowareoutputinthelistprintmode. Listdataareprintedoutoroutputinacsvformatbystoringtheminausbdevice.Papersizes availableforthisprintingarea4orltorlarger.Thissectionintroducesasampleofeachlist. Tostartthelistprintmode,turnthepowe...

  • Page 58

    45584901th rev.1 3-34 / oki data confidential •settingmode(08) 08 setting mode data list 20xx-xx-xx xx:xx code data code data code data code data 2010 2 2880 12 3040 0 3070 0 s/n: xxxxxxxxx mc7xx total: 9999999 df total: 9999999 fig. 3-23 the selected setting codes and the current setting value for ...

  • Page 59

    45584901th rev.1 3-35 / oki data confidential •errorhistory error history list 20xx-xx-xx xx:xx code counter date time zoom_xy abcd efhi jlop q r f110 00000000 xxxx-xx-xx xx:xx:xx 000 000 0000_0000_0000_0_0000000000 f110 00000000 xxxx-xx-xx xx:xx:xx 000 000 0000_0000_0000_0_0000000000 f110 00000000 ...

  • Page 60

    45584901th rev.1 3-36 / oki data confidential •firmwareupdatelog fw upgrade log 20xx-xx-xx xx:xx manufacture date 20xx-xx-xx unpacking date 20xx-xx-xx user rom/version date total copy(b) copy(2) copy(c) print(b) print(2) print(c) list fax status service txxxxxxx-xxxx 20xx-xx-xx 99999999 99999999 999...

  • Page 61

    45584901th rev.1 3-37 / oki data confidential •power-on/offlog power on_off log 20xx-xx-xx xx:xx date time function total xxxx-xx-xx xx:xx:xx on 99999999 xxxx-xx-xx xx:xx:xx off 99999999 xxxx-xx-xx xx:xx:xx on 99999999 xxxx-xx-xx xx:xx:xx off 99999999 xxxx-xx-xx xx:xx:xx on 99999999 xxxx-xx-xx xx:xx...

  • Page 62

    45584901th rev.1 3-38 / oki data confidential •versionlist version list 20xx-xx-xx xx:xx system firmware rom version : oxxxxxxxxxxx system firmware internal rom version: vx.X.X.Xx.Xx printer rom version : xxxm-xxx scanner rom version : xxxs-xxx pfc rom version : xxxf-xxx radf rom version : df-xxx fi...

  • Page 63

    45584901th rev.1 3-39 / oki data confidential •totalcounterlist print counter total full color twin/mono color black total copy 37 0 1 38 fax 0 0 0 0 printer 122 0 60 182 list 0 0 0 0 total 159 0 61 220 copy full color twin/mono color black total small 37 0 1 38 large 0 0 0 0 total 37 0 1 38 fax ful...

  • Page 64

    45584901th rev.1 4-1 / oki data confidential 4. Setting / adjustment 4.1 image related adjustment 4.1.1 adjustment order this chapter mainly explains the procedures for image related adjustment. In the following diagram,thesolidlineswitharrowleadtoessentialadjustments,whilethedottedlinesleadto adjus...

  • Page 65

    45584901th rev.1 4-2 / oki data confidential 4.1.2 performing density correction (1) whenanyofthefollowingpartsisreplaced,besuretoperformthe“performingofdensity correction (05-4905)” procedure. • drumunit • transferbeltunit notes: whenperforming“automaticgammaadjustment”in addition,“performingof den...

  • Page 66

    45584901th rev.1 4-3 / oki data confidential 4.1.3 image dimensional adjustment thereareseveraladjustmentitemsintheimagedimensionaladjustment,aslistedbelow. Item to be adjusted code in mode 05 image dimensional adjustment in the copy/ printer/fax function reproduction ratio adjustment of primary sca...

  • Page 67

    45584901th rev.1 4-4 / oki data confidential 4.1.4 image dimensional adjustment in the copy/printer/fax function [1] reproduction ratio adjustment of primary scanning direction the reproduction ratio in the primary scanning direction of the printed image can be adjusted as follows: code function rem...

  • Page 68

    45584901th rev.1 4-5 / oki data confidential 4.2 image quality adjustment (copying function) 4.2.1 automatic gamma adjustment whenthereproductionofgradationisnotappropriate,thegradationreproducibilityofallcolors y, m, c and k can be corrected by performing this automatic gamma adjustment. In case th...

  • Page 69

    45584901th rev.1 4-6 / oki data confidential (5) whentheadjustmenthasfinishednormally,pressthe[ok]buttontohavetheadjustment resultsreflected. (tocancelthereflectionofadjustmentresults,pressthe[cancel]button.) inthecaseofanabnormalending,“adjustmenterror”isshown. Pressthe[cancel]buttontocleartheerror...

  • Page 70

    45584901th rev.1 4-7 / oki data confidential 4.3 image quality adjustment (printing function) 4.3.1 automatic gamma adjustment whenthereproductionofgradationisnotappropriate,thegradationreproducibilityofallcolors y, m, c and k can be corrected by performing this automatic gamma adjustment. In case t...

  • Page 71

    45584901th rev.1 4-8 / oki data confidential (3) placethepatchchartforadjustmentprintedinstep(2)facedownontheoriginalglass,with itsside,onwhichtwoblacksquaresarepresent,alignedagainsttheoriginalscale. (4) keyinacodeandpressthe[start]button. → the scanner reads the chart automatically and performs au...

  • Page 72

    45584901th rev.1 4-9 / oki data confidential 4.3.2 gamma balance adjustment (black mode) the gamma balance is adjusted by adjusting the density at the black mode. The adjustment is performedbyselectingitsdensityareafromthefollowing:lowdensity,mediumdensity,andhigh density. When“black”(600dpi)issetfo...

  • Page 73

    45584901th rev.1 4-10 / oki data confidential (1) whilepressing[0]and[5]simultaneously,turnthepoweron. (2) keyinthecodestobeadjusted(languageandscreen)andpressthe[start]button. (3) keyinthevaluecorrespondingtothedensityareatobeadjusted(0,1or2)andpressthe [start] button. 0:lowdensity1:mediumdensity2:...

  • Page 74

    45584901th rev.1 4-11 / oki data confidential 4.3.3 color balance adjustment the color balance is adjusted by adjusting the density of each color. The adjustment is performedbyselectingitsdensityareafromthefollowing:lowdensity,mediumdensity,andhigh density. For color printing color ps pcl xps remark...

  • Page 75

    45584901th rev.1 4-12 / oki data confidential twin color print color specified for twin color print item to be adjusted remarks black yellow magenta cyan black 8023-0 - - - thelargerthevalueis,thedarker the color to be adjusted becomes. Acceptable values: 0 to 255 (default: 128) 8023-1 - - - 8023-2 ...

  • Page 76

    45584901th rev.1 4-13 / oki data confidential 4.3.4 adjustment of faint text the faint text can be improved in the following codes. Black mode color mode remarks ps pcl xps ps pcl xps 7340 7341 7342 8130 8131 8132 whenthesmallcharactersorfinelines inahalftoneimagearefaint,theycan be improved by incr...

  • Page 77

    45584901th rev.1 4-14 / oki data confidential 4.3.6 maximum toner density adjustment (special paper 3) the maximum toner amount adhering to the paper can be controlled. Color code paper type remarks color (600dpi) 8145 special paper 3 thesmallerthevalueis,thetoneramount adhered decreases of the high...

  • Page 78

    45584901th rev.1 4-15 / oki data confidential 4.3.9 “pureblack/puregray”thresholdadjustment(twincolormode) code item to be adjusted remarks 8213 text thelargerthevalueis,thewiderthecolorrangetobe printed only with the black toner becomes. The smaller thevalueis,thenarrowerthiscolorrangebecomes. Acce...

  • Page 79

    45584901th rev.1 4-16 / oki data confidential 4.3.12 toner limit threshold adjustment smooth/ auto (ps/ pcl/xps) detail (ps/ pcl/xps) smooth/ auto (1200dpi) detail (1200dpi) paper type remarks 8071-0 8070-0 8090-0 8089-0 plain paper whenyousetalargervalue,the density becomes high in some parts of th...

  • Page 80

    45584901th rev.1 4-17 / oki data confidential 4.3.13 sharpness adjustment this adjustment is applied when images need to be softer or sharper. The adjustment for each original mode is available. The performance of this adjustment differs depending on the setting value of 05-7322 or 05- 8102with“p.4...

  • Page 81

    45584901th rev.1 4-18 / oki data confidential 4.3.14 thin line width lower limit adjustment code remarks 8240 (600dpi) setsthelowerlimitvalueofthethinlinewidthwhen“distinguishthinlines”is selected in the screen selecting menu of the printer driver. Thelargerthevalueis,thethicker(darker)thethinlinebe...

  • Page 82

    45584901th rev.1 4-19 / oki data confidential 4.3.17 ledemissionleveladjustment theledemissionlevelintheboxprinting(black/binary),networkfaxande-mailfaxcanbe set. The size of the dots can be adjusted. Code item to be adjusted remarks 7330-0 ledemissionlevel0/4 thesmallerthevalueis,thesmallertheled e...

  • Page 83

    45584901th rev.1 4-20 / oki data confidential 4.3.18 density adjustment of graphic lines (1200 dpi) thisadjustmentisavailableregardlessofwhether“distinguishthinlines”oftheprinterdriveris selected or not. Color mode code remarks color/black 8242-0 the density of the line in black in the line density ...

  • Page 84

    45584901th rev.1 4-21 / oki data confidential 4.3.19 auto trapping width/density adjustment (ps) code item to be adjusted remarks 8244-0 trapping width (dot) setsthevalueofwidthforautotrapping.Whenthevalue increases,thebiggergapissuppressed,buttheoverlap part becomes more visible. 1: 1 dot 2: 2 dot ...

  • Page 85

    45584901th rev.1 4-22 / oki data confidential 4.4 image quality adjustment (scanning function) 4.4.1 gamma balance adjustment the gamma balance at the black mode is adjusted by adjusting the density. The adjustment is performedbyselectingitsdensityareafromthefollowing:lowdensity,mediumdensityandhigh...

  • Page 86

    45584901th rev.1 4-23 / oki data confidential 4.4.2 density adjustment adjusts the center density. Color mode original mode item to be adjusted remarks text/ photo text photo custom mode color 8339 8340 8341 8380 manual density center value thelargerthevalueis,the darker the image becomes. Acceptabl...

  • Page 87

    45584901th rev.1 4-24 / oki data confidential 4.4.3 background adjustment (color mode) the adjustment level of background center value is adjusted. The control value of background adjustment button is automatically adjusted to the same level as the adjusted center value. For example, when the contro...

  • Page 88

    45584901th rev.1 4-25 / oki data confidential 4.4.4 background adjustment (black/grayscale) the density of background can be adjusted as follows. Code color mode original mode remarks 7436 black text/photo thesmallerthevalueis,thebackground becomes lighter. Acceptable values: 0 to 255 (default: 128)...

  • Page 89

    45584901th rev.1 4-26 / oki data confidential 4.4.6 sharpness adjustment ifyouwanttomakescanimageslooksofterorsharper,performthefollowingadjustment.The adjustment can be made for each of the color modes and original modes independently. Code color mode original mode contents 8354 full color text/pho...

  • Page 90

    45584901th rev.1 4-27 / oki data confidential 4.4.8 rgb conversion method selection the color space conversion method of image is decided at color-scanning. Code original mode remarks 8319 text/photo 0:srgb,1:applergb,2:rommrgb,3:adobergb (default: 0) 8320 text 8321 photo 8372 custom mode (1) whilep...

  • Page 91

    45584901th rev.1 4-28 / oki data confidential 4.4.10 backgroundoffsettingadjustmentforradf(commonforcopy,scanandfax) the background level for scanning originals with the radf is adjusted when the background fogging at the scanning of a manually-set original and an original used with the radf is diff...

  • Page 92

    45584901th rev.1 4-29 / oki data confidential 4.4.12 surrounding void amount adjustment the void amount around the network scanned image is adjusted. In network scanning, since the void amount is very small in stored images, a shadow may appear around the scanned image due to the subtle difference i...

  • Page 93

    45584901th rev.1 4-30 / oki data confidential 4.4.14 jpeg compression level adjustment the compression level for saving the scanned data in the jpeg format can be adjusted as follows. Code item to be adjusted remarks 8304-0 highquality thelargerthevalueis,thebetterthequalitybecomes, and the larger t...

  • Page 94

    45584901th rev.1 5-1 / oki data confidential 5. Error code and troubleshooting 5.1 general descriptions thischapterexplainstheproceduresforsolvingtroublesoccurringintheequipment. When a trouble occurs, check if an error code is displayed on the lcd screen of the control panelfirst.Ifdisplayed,refert...

  • Page 95

    45584901th rev.1 5-2 / oki data confidential 5.1.2 collection of debug logs with a usb device [1] general description the purpose of collecting the debug logs is to acquire the information for analyzing problems whichoccurredduringthemfp’soperation.Insuchacase,youcancollectthedebuglogsby inserting a...

  • Page 96

    45584901th rev.1 5-3 / oki data confidential notes: • donotremovetheusbdevicewhiletheledinthemfpisblinking. • if the led does not start blinking after the usb device is inserted and a few minutes havepassed,trytheprocedurefromstep1again. • if there is no beeping after the led starts blinking (about ...

  • Page 97

    45584901th rev.1 5-4 / oki data confidential 5.2 error code list thefollowingerrorcodesisdisplayedattheupperrightofthescreenwhenthe“clearpaper” or“callservice”symbolisblinking. Notes: fortheerrorcodesnotdescribedinthisguide,refertothehardwareguide. 5.2.1 jam error code classification contents troubl...

  • Page 98

    45584901th rev.1 5-5 / oki data confidential 5.2.2 service call error code classification contents troubleshooting cb30 finisher related service call stacker motor abnormality p. 5-32 cb40 rear alignment hp abnormality p. 5-32 cb50 stapler motor hp abnormality p. 5-33 cc03 download abnormality p. 5-...

  • Page 99

    45584901th rev.1 5-6 / oki data confidential error code classification contents troubleshooting f101_5 other service call partition mount error: the hdd cannot be connected (mounted) caused by damage to the "/registration" partition. P. 5-47 f101_6 partition mount error: the hdd cannot be connected ...

  • Page 100

    45584901th rev.1 5-7 / oki data confidential error code classification contents troubleshooting f120 other service call database abnormality: database is not operating normally. P. 5-57 f121 database abnormality (user information management database) p. 5-58 f122 database abnormality (message/job lo...

  • Page 101

    45584901th rev.1 5-8 / oki data confidential 5.2.3 errorininternetfax/scanningfunction 1.Internetfaxrelatederror error code classification troubleshooting 1c10 system access abnormality p. 5-63 1c11 insufficient memory p. 5-63 1c12 message reception error p. 5-63 1c13 message transmission error p. 5...

  • Page 102

    45584901th rev.1 5-9 / oki data confidential 2. Rfc related error error code message displayed in the webpagescreen contents troubleshooting 2500 syntaxerror,command unrecognized host name error (rfc: 500) destination mail address error (rfc: 500) terminal mail address error (rfc: 500) p. 5-65 2501 ...

  • Page 103

    45584901th rev.1 5-10 / oki data confidential 3. Electronic filing related error error code message displayed in the webpagescreen contents troubleshooting 2b11 job status failed. Job status abnormality p. 5-65 2b20 failed to access file. File library function error p. 5-65 2b30 insufficient disk sp...

  • Page 104

    45584901th rev.1 5-11 / oki data confidential 4. Remote scanning related error error code message displayed in the webpagescreen contents troubleshooting 2a20 failedtoacquireresource system management module resource acquiringfailure p. 5-66 2a31 wsscanfunctionisnot available disabledwsscan p. 5-66 ...

  • Page 105

    45584901th rev.1 5-12 / oki data confidential 5. E-mail related error error code message displayed in the webpagescreen contents troubleshooting 2c10 illegal job status system access abnormality p. 5-67 2c11 not enough memory insufficient memory p. 5-67 2c12 illegal job status message reception erro...

  • Page 106

    45584901th rev.1 5-13 / oki data confidential 6. File sharing related error error code message displayed in the webpagescreen contents troubleshooting 2d10 illegal job status system access abnormality p. 5-69 2d11 not enough memory insufficient memory p. 5-69 2d12 illegal job status message receptio...

  • Page 107

    45584901th rev.1 5-14 / oki data confidential error code message displayed in the webpagescreen contents troubleshooting 2da3 scanned documents in shared folder deleted upon user’srequest. Manual deletion of scanned documents completed properly. - 2da4 sent fax documents in shared folder deleted upo...

  • Page 108

    45584901th rev.1 5-15 / oki data confidential 7. E-mail reception related error error code message displayed in the webpagescreen contents troubleshooting 3a10 mime error has been deteched in the received mail e-mail mime error p. 5-72 3a20 analyze error has been detected in the received mail. E-mai...

  • Page 109

    45584901th rev.1 5-16 / oki data confidential error code message displayed in the webpagescreen contents troubleshooting 3c70 power failure has been occurred in email receiving. Power failure error p. 5-74 3c90 offramp fax transmission disable error has been detected in the received mail. Offramp fa...

  • Page 110

    45584901th rev.1 5-17 / oki data confidential 5.2.4 printer function error following codes are displayed at the end of the user name on the print job log screen. Error code contents troubleshooting 4011 printjobcancellation-printjob(copy,listprint,networkprint)isdeleted from the print job screen. P....

  • Page 111

    45584901th rev.1 5-18 / oki data confidential error code contents troubleshooting 4412 double-sign encoding error: a double-sign encoding error occurred because the pdf file is encrypted in a forbidden language or in a language not supported. P. 5-76 4611 font download failure (exceeding maximum num...

  • Page 112

    45584901th rev.1 5-19 / oki data confidential 5.2.5 webpagerelatederror/communicationerrorwithexternalapplication error code message displayed in the webpagescreen contents troubleshooting 5010 - internalsettingerror:thereisaprintjob, aproofprintjob,aprivateprintjob,a printjobwithoutasetdepartmentco...

  • Page 113

    45584901th rev.1 5-20 / oki data confidential 5.2.6 mfp access error error code message displayed in the webpagescreen contents troubleshooting 6007 failed user login unsuccessfuluserlogintomfp: user authentication cannot be done because connection to the authentication server has failed. P. 5-81 60...

  • Page 114

    45584901th rev.1 5-21 / oki data confidential 5.2.7 maintenance error error code message displayed in the webpagescreen contents troubleshooting 7101 failed to update copier firmware system firmware installation failure p. 5-83 7103 failed to update copier main rom engine firmware installation failu...

  • Page 115

    45584901th rev.1 5-22 / oki data confidential 5.2.8 network error error code message displayed in the webpagescreen contents troubleshooting 8000 static ipv4 duplicated address detected ipv4 address overlaps. P. 5-88 8011 linklocaladdressofipv6 was duplicated. Linklocaladdressconflict p. 5-88 8012 m...

  • Page 116

    45584901th rev.1 5-23 / oki data confidential error code message displayed in the webpagescreen contents troubleshooting 8043 ikeversionmismatch ipsec error if ike version is not matching p. 5-93 8044 encapsulation mode mismatch ipsec error for encaptulation is not matching p. 5-93 8045 peer ip addr...

  • Page 117

    45584901th rev.1 5-24 / oki data confidential error code message displayed in the webpagescreen contents troubleshooting 8127 domain - invalid logon hours for the user domain - invalid logon hours for the user p. 5-97 8128 active directory domain - clock skew error due to difference in time between ...

  • Page 118

    45584901th rev.1 5-25 / oki data confidential 5.2.9 error history inthesettingmode(08-9703),thelatesttwentygroupsoferrordatawillbedisplayed. Display example ea10 99999999 0 6 0 4 1 4 1 7 5 7 3 2 064 064 2362_1000_0000_0 _xxxxxxxxxx error code total counter yy mm dd hh mm ss mmm nnn abcd_efhi_jlop_q ...

  • Page 119

    45584901th rev.1 5-26 / oki data confidential o color mode 0: auto color 1: full color 2: black 3: unused 4: twin color copy 5: gray scale 6: unused 7: image smoothing p media type 0: plain 1: thick1 2: thick2 3: thick3 4: thick4 5: thick5 6:thin 7:special1_label1 8:special2_label2 9:special3_transp...

  • Page 120

    45584901th rev.1 5-27 / oki data confidential 5.3 diagnosis and prescription for each error code 5.3.1 check item check item contents sensor check • checkthesensorinthetestmode. • checkthatthereisnodustonthesensor. • checkthattheactuatoriscorrectlyoperated. Connector check • checkthattheconnectorisn...

  • Page 121

    45584901th rev.1 5-28 / oki data confidential 5.3.2 paper jam in finisher section [ea10] paper not detected classification error content paper jam in finisher section paper was not detected at the finisher within the set period after the paper was fed by the main unit. Check item measures entrance t...

  • Page 122

    45584901th rev.1 5-29 / oki data confidential [ea26] paper transport jam (stop command request) classification error content paper jam in finisher section mainunitrequestedfinishertostopoperatingwhilefinisherwasfeeding paper. Check item measures transport path ifthereispaperinthepapertransportpath,r...

  • Page 123

    45584901th rev.1 5-30 / oki data confidential [ea2b] paper transport jam (exit transport sensor) classification error content paper jam in finisher section paper stayed for longer than set period at exit transport sensor while being transported in finisher transport path. Check item measures transpo...

  • Page 124

    45584901th rev.1 5-31 / oki data confidential [ea40] side cover open jam classification error content paper jam in finisher section jam occurred because finisher's side cover was opened while finisher was transporting paper. Check item measures transport path ifthereispaperinthepapertransportpath,re...

  • Page 125

    45584901th rev.1 5-32 / oki data confidential 5.3.3 finisher related service call [cb30] stacker motor abnormality *if[eaf8]occurstwotimesconsecutively,itbecomesa[cb30]error. Classification error content finisher related service call stacker motor position detection error check item measures stack h...

  • Page 126

    45584901th rev.1 5-33 / oki data confidential [cb50] stapler motor hp abnormality *if[eaf2]occurstwotimesconsecutively,itbecomesa[cb50]error. Classification error content finisher related service call stapler motor hp abnormality check item measures stapler • connectorcheck(p9-1) • harnesscheck stap...

  • Page 127

    45584901th rev.1 5-34 / oki data confidential [cc91] ejector abnormality *if[eaf3]occurstwotimesconsecutively,itbecomesa[cc91]error. Classification error content finisher related service call ejector abnormality check item measures ejector home position sensor • sensorcheck(s7) • connectorcheck(p7-1...

  • Page 128

    45584901th rev.1 5-35 / oki data confidential [cc96] lever path hp abnormality *if[eaf5]occurstwotimesconsecutively,itbecomesa[cc96]error. Classification error content finisher related service call leverpathhpabnormality check item measures leverpathhomeposition sensor • sensorcheck(s15) • connector...

  • Page 129

    45584901th rev.1 5-36 / oki data confidential [eaf2] stapler motor hp abnormality classification error content finisher related service call stapler motor hp abnormality check item measures stapler • connectorcheck(p9-1) • harnesscheck stapler motor • motorcheck(m9) • connectorcheck(p9-1) • harnessc...

  • Page 130

    45584901th rev.1 5-37 / oki data confidential [eaf4] paper support hp abnormality classification error content finisher related service call paper support hp abnormality check item measures paper support home position sensor • sensorcheck(s6) • connectorcheck(p7-13) • harnesscheck paper support moto...

  • Page 131

    45584901th rev.1 5-38 / oki data confidential [eaf6] front alignment hp abnormality classification error content finisher related service call front alignment hp abnormality check item measures front alignment plate home position sensor • sensorcheck(s4) • connectorcheck(p8-3) • harnesscheck front a...

  • Page 132

    45584901th rev.1 5-39 / oki data confidential [eaf8] stacker motor position detection error classification error content finisher related service call stacker motor position detection error check item measures stack home position sensor • sensorcheck(s9) • connectorcheck(p7-11) • harnesscheck stacke...

  • Page 133

    45584901th rev.1 5-40 / oki data confidential 5.3.4 communication related service call [f070] communication error between cu board and pu board classification error content communication related service call communication error between cu board and pu board check item measures error code • turnthepo...

  • Page 134

    45584901th rev.1 5-41 / oki data confidential [f071] communication initialization error between cu board and pu board classification error content communication related service call communication initialization error between cu board and pu board proce- dure check item measures 1 ledhead,harness 1-1...

  • Page 135

    45584901th rev.1 5-42 / oki data confidential [f110] communication error between system-cpu and scanner-cpu [f111] scanner response abnormality classification error content communication related service call [f110] communication error between system-cpu and scanner-cpu [f111] scanner response abnorm...

  • Page 136

    45584901th rev.1 5-43 / oki data confidential 5.3.5 circuit related service call [f090] sram abnormality on the cu board classification contents circuit related service call sram abnormality on the cu board check item measure sram check the connection of sram 1. Turnthepoweroff,andstartupthesettingm...

  • Page 137

    45584901th rev.1 5-44 / oki data confidential [f400] cu board abnormality classification contents circuit related service call cu board abnormality check item measures cu board board check replacement part measure cu board.

  • Page 138

    45584901th rev.1 5-45 / oki data confidential 5.3.6 other service call [f100_0] hdd format error (operation failure of key data) classification contents other service call hdd format error: operation of hdd key data fails. Check item measures setting reboottheequipment. Ifitcannotberecovered,reinsta...

  • Page 139

    45584901th rev.1 5-46 / oki data confidential [f100_2] hdd format error (hdd encryption key data damaged - both boards) classification contents other service call hdd format error: encryption key data of both the cu board and the sram board for the cu board are damaged. Check item measures encryptio...

  • Page 140

    45584901th rev.1 5-47 / oki data confidential [f101_0] hdd connection error (hdd connection cannot be detected.) [f101_1] root partition mount error (hdd formatting fails.) [f101_2][f101_3] partition mount error (the hdd cannot be connected (mounted) caused by damage to areas other than those descri...

  • Page 141

    45584901th rev.1 5-48 / oki data confidential [f101_4] partition mount error (the hdd cannot be connected (mounted) caused by damage to the “/work” partition.) classification contents other service call hdd unmounted: connection of hdd cannot be detected. Sub-code 4: partition mount error (the "/wor...

  • Page 142

    45584901th rev.1 5-49 / oki data confidential [f102] hdd start error [f103] hdd transfer time-out [f104] hdd data error [f105] hdd other error classification contents other service call hddstarterror:hddcannotbecome“ready”state. Hdd transfer time-out: reading/writing cannot be performed in the speci...

  • Page 143

    45584901th rev.1 5-50 / oki data confidential [f106_1] adi-hdd error: hdd type detection error classification error item other service call adi-hdd error: hdd type detection fails. Check item measures setting iftheerrorisnotrecoveredafterrebootingtheequipmentorno abnormalityisfoundonanycheckitemsfor...

  • Page 144

    45584901th rev.1 5-51 / oki data confidential [f106_3] adi-hdd error: adi authentication admin password generation error classification error item other service call adi-hdd error: the generation of adi authentication admin password fails. Check item measures setting reinstall the system firmware. R...

  • Page 145

    45584901th rev.1 5-52 / oki data confidential [f109_0] key consistency error (consistency check operation error) classification contents other service call keyconsistencyerror-keyconsistencycheckoneachkeydatafails. Check item measures setting reboottheequipment. Ifitcannotberecovered,reinstallthesof...

  • Page 146

    45584901th rev.1 5-53 / oki data confidential [f109_3] key consistency error (hdd encryption parameter damage) classification contents other service call keyconsistencyerror-parameterusedforhddpartitionencryptionare damaged. Check item measures encryption key status confirmation checkthemessagedispl...

  • Page 147

    45584901th rev.1 5-54 / oki data confidential [f109_4] key consistency error (license data damage) classification contents other service call keyconsistencyerror-thelicensedataaredamaged. Check item measures encryption key status confirmation checkthemessagedisplayedby[3]+[c]+[power] →5.Keybackup re...

  • Page 148

    45584901th rev.1 5-55 / oki data confidential [f109_5] key consistency error (encryption key for adi-hdd is damaged) classification contents other service call keyconsistencyerror-encryptionkeyforadi-hddisdamaged. Check item measures encryption key status confirmation checkthemessagedisplayedby[3]+[...

  • Page 149

    45584901th rev.1 5-56 / oki data confidential sramkey status fromkey status measure keymismatch keymismatch recover the encryption key on the cu board. (transfer the license fromsys-sramtosys-from.)  p. 6-16 "6.2.4 precautions and procedures when replacing the cu board"([d]restore adi key) recover ...

  • Page 150

    45584901th rev.1 5-57 / oki data confidential sramkey status fromkey status measure keynull/ keybroken keynull/ keybroken 1.Createthepartitioninthehdd,andreinstallthesystemsoftware.  p. 6-11 "6.2.3 precautions and procedures when replacing the hdd"(performstep3orlaterin“[e]replace/formathdd”) 1. Re...

  • Page 151

    45584901th rev.1 5-58 / oki data confidential [f121] database abnormality (user information management database) classification error item other service call loginafterthestartupfailsinanystartingmodebecauseuser management database is corrupted. Check item measures setting 1.Deletetheloginthefollowi...

  • Page 152

    45584901th rev.1 5-59 / oki data confidential [f130] invalid mac address classification contents other service call invalid mac address check item measures setting comparetheserialnumberoftheequipmentwithanumberdisplayed with08-9601.Iftheyaredifferent,enterthecorrectserialnumberat08- 9601,08-9083. [...

  • Page 153

    45584901th rev.1 5-60 / oki data confidential [f200] data overwrite option (gp-1070) disabled classification contents other service call data overwrite option (gp-1070) disabled check item measures setting performfirmwareinstallation(allfirmware:os,hdd,sys,enginemain firmware,andscannerfirmware)with...

  • Page 154

    45584901th rev.1 5-61 / oki data confidential [f520] operating system start error classification error item other service call the operating system fails to start. Check item measures setting 1. Reboot. 2.Ifithasstillnotrecovered,reinstallthesystemsoftware. 3.Ifitstillpersistsafterstep2,perform[3]+[...

  • Page 155

    45584901th rev.1 5-62 / oki data confidential [f700] overwrite error classification error item other service call overwriting fails. Check item measures setting • ifaservicecalloccursagainafterthereboot,replacethehdd. [f800] date error classification error item other service call the year 2038 probl...

  • Page 156

    45584901th rev.1 5-63 / oki data confidential 5.3.7 errorininternetfax/scanningfunction notes: • when formatting the hdd ([5] + [c] + [power] on → [3] → [1]), all data in the shared folder,electronicfiling,addressbook,template,etc.Areerased.Backupthesedatabefore the initialization. Note that some of...

  • Page 157

    45584901th rev.1 5-64 / oki data confidential [1c63] terminal ip address unset reset the terminal ip address. Turn the power off and then back on. Perform the job in error again. [1c64] terminal mail address unset reset the terminal mail address. Turn the power off and then back on. Perform the job ...

  • Page 158

    45584901th rev.1 5-65 / oki data confidential [2] rfc related error [2500] host name error (rfc: 500) / destination mail address error (rfc: 500) / terminal mail address error (rfc: 500) [2501] host name error (rfc: 501) / destination mail address error (rfc: 501) / terminal mail address error (rfc:...

  • Page 159

    45584901th rev.1 5-66 / oki data confidential [2b50] image library error [2b90] insufficient memory capacity turnthepoweroffandthenbackon.Performthejobinerroragain.Iftheerrorstilloccurs, replace the main memory. Deletethejobinprogressorbeingsetorinthehold/private/proof/invalid,andretry the job in er...

  • Page 160

    45584901th rev.1 5-67 / oki data confidential [2a51] power failure check if the power cable is properly connected. Check if the power supply voltage is inconstant. [2a60] ws scan user authentication failure • when“1”(wiadriver)issetfor08-9749andalsowindowsfax&scanisusedcheckifthe usernamethatyouused...

  • Page 161

    45584901th rev.1 5-68 / oki data confidential [2c30] directory creation failure [2c31] file creation failure [2c33] file access failure check if the access privilege to the storage directory is writable. Check if the server or local disk has a sufficient space in disk capacity. [2c40] image conversi...

  • Page 162

    45584901th rev.1 5-69 / oki data confidential [2c6a] host name error (no rfc error) check if there is an illegal character in the device name. Delete the illegal character and reset the appropriate device name. [2c6b] terminal mail address error check the smtp authentication method. Check if there i...

  • Page 163

    45584901th rev.1 5-70 / oki data confidential [2d14] invalid parameter whenatemplateisused,formthetemplateagain. Iftheerrorstilloccurs,turnthepoweroffandthenbackon,andperformthejobagain. [2d15] exceeding the maximum size for file sharing divide the file in error into several files and retry. Or retr...

  • Page 164

    45584901th rev.1 5-71 / oki data confidential [2d68] file sharing service not available check if the setting of smb is valid. [2d69] netware service not available check if the netware setting is enabled. [2dc1] power failure check if the power cable is connected properly and it is inserted securely....

  • Page 165

    45584901th rev.1 5-72 / oki data confidential [2e43] encryption failure in usb storage turn the power off and then back on. Perform the job in error again. [2e44] encryption pdf enforced mode error in usb storage reset the encryption and perform the job in error again. To create an image file not en...

  • Page 166

    45584901th rev.1 5-73 / oki data confidential [3a50] insufficient hdd capacity error these errors occur when the hdd capacity is not sufficient for a temporary concentration of thejobs,etc. Requestthesendertoretransmitafteracertainperiodoftime,ordividethemailintomore than one. Insufficient hdd capac...

  • Page 167

    45584901th rev.1 5-74 / oki data confidential [3c70] power failure error check if the mail is recovered after turning on the power again. Requestthesendertoretransmitthemailifitisnotrecovered. [3c90] offramp fax transmission disable error 5 offramp fax transmission disable error has been detected in...

  • Page 168

    45584901th rev.1 5-75 / oki data confidential 5.3.8 printer function error [4011] print job cancellation this message appears when deleting the job on the screen. [4021] print job power failure whentherearerunningjobs,performthejobinerroragainafterthecompletionoftherunning jobs.Iftheerrorstilloccurs...

  • Page 169

    45584901th rev.1 5-76 / oki data confidential [4214] fax/internet fax transmission limitation error checkthesettingsofthisequipment. [4221] private-print-only error select“privateprint”,andthenperformtheprintingagain. [4231] hardcopy security printing error hardcopy security printing cannot be perfo...

  • Page 170

    45584901th rev.1 5-77 / oki data confidential 5.3.9 webpagerelatederror/communicationerrorwithexternalapplication [5010] internal setting error classification error item communication error with external application thereisaprintjob,aproofprintjob,aprivateprintjob,aprintjob withoutasetdepartmentcode...

  • Page 171

    45584901th rev.1 5-78 / oki data confidential [5016] expired ssl certificate classification error item communication error with external application sslcertificateisexpired. Check item measures setting set the correct time. [5017] other ssl certificate related error classification error item communi...

  • Page 172

    45584901th rev.1 5-79 / oki data confidential [501b] no url (host/port) or invalid path classification error item communication error with external application initialurlisinvalid. Check item measures setting setthecorrectinitialurl. [5030] http communication error classification error item communic...

  • Page 173

    45584901th rev.1 5-80 / oki data confidential [5bd0] power failure during restoration classification error item webpagerelatederror check item measures setting • checkifthepowercableisconnectedproperlyandisinserted securely. • checkifthepowervoltageisunstable. • reattempttherestorationofthedatabase(...

  • Page 174

    45584901th rev.1 5-81 / oki data confidential 5.3.10 mfp access error [6007] unsuccessful user login to mfp classification error item mfp access error user authentication cannot be done because connection to the authentication server has failed. Check item measures setting check if the operating sta...

  • Page 175

    45584901th rev.1 5-82 / oki data confidential [6041] card authentication: card related error classification error item mfp access error card data cannot be obtained correctly. Check item measures setting reattempt scanning. If the error still occurs after reattempting scanning forseveraltimes,cardda...

  • Page 176

    45584901th rev.1 5-83 / oki data confidential 5.3.11 maintenance error [7101] system firmware installation failure [7103] engine firmware installation failure [7105] scanner firmware installation failure [7111] patch installation failure [7113] plug-in installation failure [7115] hdd data installati...

  • Page 177

    45584901th rev.1 5-84 / oki data confidential [711d] license key returning failure classification error item maintenance error the one-time dongle license fails to be returned to usb device. Check item measures setting return the license to the usb device used for installing the license. Check that ...

  • Page 178

    45584901th rev.1 5-85 / oki data confidential [71ac] file save error during certificate acquisition from scep server classification error item maintenance error filesaveerroroccurredduringcertificateacquisitionfromscepserver. Check item measures setting file saving failed for some reason. If the err...

  • Page 179

    45584901th rev.1 5-86 / oki data confidential [7263] su loader installation failure classification error item maintenance error suloaderinstallationfailure check item measures setting suloaderinstallationfailed.Reinstallthefirmware. [7265] su recovery installation failure classification error item m...

  • Page 180

    45584901th rev.1 5-87 / oki data confidential [726f] finisher installation failure classification error item maintenance error finisher installation failure check item measures setting finisher installation failed. Reinstall the firmware. [7271] duplex installation failure classification error item ...

  • Page 181

    45584901th rev.1 5-88 / oki data confidential 5.3.12 network error [8000] static ipv4 address conflict classification error item network error ipv4 address overlaps. Check item measures setting check if the same ip address is not used by other machine. [8011] linklocal address conflict classificatio...

  • Page 182

    45584901th rev.1 5-89 / oki data confidential [8023] can not contact authentication server/switch classification error item network error failed in connection to authentication server and switch. Check item measures setting check connectivity to switch or server. [8024] certificate verification fail...

  • Page 183

    45584901th rev.1 5-90 / oki data confidential [8034] ikev1 invalid certificate classification error item network error ipsec error if invalid certificate uploaded check item measures setting check the ca and user certificate in mfp and peer machine. [8035] ikev1 certificate not supported classificat...

  • Page 184

    45584901th rev.1 5-91 / oki data confidential [8039] ikev1 invalid signature classification error item network error ipsec error for invalid signaturer for certificate check item measures setting mismatchinsignaturepayload(macoriv). Check the ca and user certificate in mfp and peer machine. [803a] i...

  • Page 185

    45584901th rev.1 5-92 / oki data confidential [803e] ikev2 isakmp sa unavialable classification error item network error ipsecerrorifisakmpsaisnotcreatedofdestroyedduetosome uncertain condition check item measures setting restart ipsec service on peer and retry. [803f] ikev2 cryptographic operation ...

  • Page 186

    45584901th rev.1 5-93 / oki data confidential [8043] ipsec ike version mismatch classification error item network error ipsec error if ike version is not matching check item measures setting mismatchinikeversion. Checktheikeversioninmfpandpeer. [8044] ipsec encaptulation mismatch classification erro...

  • Page 187

    45584901th rev.1 5-94 / oki data confidential [8049] ipsec remote ip mismatch classification error item network error ipsec error for remote ip mismatch check item measures setting remote traffic selector mismatch. Check the source address/port in ipsec filter. [804a] ipsec ike timeout classificatio...

  • Page 188

    45584901th rev.1 5-95 / oki data confidential [8069] invalid tsig/sig(0) key file classification error item network error this message is displayed when the key file for sig(0) or tsig is invalid. Check item measures setting verifythetsig/sig(0)keyfilesused. [8101] wireless association with access p...

  • Page 189

    45584901th rev.1 5-96 / oki data confidential [8122] domain - invalid username or password classification error item network error the user name or password of the domain authentication is not valid and the user cannot log on. Check item measures setting check if the user name or password is correct...

  • Page 190

    45584901th rev.1 5-97 / oki data confidential [8127] domain - invalid logon hours for the user classification error item network error the user log-on time is invalid at domain authentication and the user cannot log-on. Check item measures setting check the log-on time setting of the user account in...

  • Page 191

    45584901th rev.1 5-98 / oki data confidential 5.4 other errors 5.4.1 equipmentoperationdisabledaftertheinstallationofoption(s) check if the optional board is installed properly. 5.4.2 wirelesslanconnectiondisabled the connection state and settings of thewireless lan can be checked with [user functio...

  • Page 192

    45584901th rev.1 6-1 / oki data confidential 6. Replacement of pc boards/hdd 6.1 removal and installation of pc boards/hdd refer to the hardware guide for the removal and installation procedures of the pc boards other thanthecuboard,hdd,andsramboard. Notes: when the pc board/hdd is replaced, refer t...

  • Page 193

    45584901th rev.1 6-2 / oki data confidential (3) release 2 latches. Fig.6-6 (4) release the latch. Fig.6-7 (5) closethescannerandtopcover,thenopenthefeederunit.Removetherightsidecover[1]. [1] fig.6-8.

  • Page 194

    45584901th rev.1 6-3 / oki data confidential 6.1.2 cu board cover (1) take off the right side cover. p.6-1“6.1.1rightsidecover” (2) remove15screws,andtakeoffthecuboardcover. Fig.6-9 6.1.3 cu board (1) take off the right side cover. p.6-1“6.1.1rightsidecover” (2) take off the cu board cover. p.6-3...

  • Page 195

    45584901th rev.1 6-4 / oki data confidential (5) take out the connectors and cable from the cu board case. Fig.6-11 (6) remove 2 screws. Fig.6-12 (7) remove8screws,andthentakeoffthecuboard. Notes: whenremovingthecuboard,donotapplypressuretotheheatsink,memoryorsram board by holding them too firmly. F...

  • Page 196

    45584901th rev.1 6-5 / oki data confidential 6.1.4 hard disk (hdd) (1) take off the right side cover. p.6-1“6.1.1rightsidecover” (2) take off the cu board cover. p.6-3“6.1.2cuboardcover” (3) take off the fax unit if it’s installed. p.6-7“6.1.6faxunit” (4) unplug the connector connected to the har...

  • Page 197

    45584901th rev.1 6-6 / oki data confidential 6.1.5 sram board (1) take off the right side cover. p.6-1“6.1.1rightsidecover” (2) take off the cu board cover. p.6-3“6.1.2cuboardcover” (3) take off the fax unit if it’s installed. p.6-7“6.1.6faxunit” (4) release 2 latches and take off the sram board ...

  • Page 198

    45584901th rev.1 6-7 / oki data confidential 6.1.6 faxunit (1) take off the right side cover. p.6-1“6.1.1rightsidecover” (2) take off the cu board cover. p.6-3“6.1.2cuboardcover” (3) remove 2 screws. Fig.6-19 (4) unplug the connectors and cable connected to the cu board. Fig.6-20 (5) remove2screws...

  • Page 199

    45584901th rev.1 6-8 / oki data confidential 6.2 precautions, procedures and settings for replacing pc boards and hdd 6.2.1 precautions when replacing pc boards • theidforeachequipmentisregisteredonthepuboard,thecuboardandsuboard.So,if theirreplacementisrequired,besuretoreplaceonlyoneboardatatime.Do...

  • Page 200

    45584901th rev.1 6-9 / oki data confidential 6.2.2 hdd fault diagnosis this code displays the hdd operation history, which is recorded in the hdd, on the control panel. Hdd failure can be diagnosed or predicted with the information displayed. 1. Display the following screen is displayed with setting...

  • Page 201

    45584901th rev.1 6-10 / oki data confidential 3.Id=05andc5 id name description remarkd 05 re-allocated sector count the number of sectors reassigned this value tends to increase at hdd failure. C5 current pending sector count the number of candidate sectors to be reassigned this value tends to incre...

  • Page 202

    45584901th rev.1 6-11 / oki data confidential 6.2.3 precautions and procedures when replacing the hdd notes: • whenthehddisreplaced,itisnecessarytobackupthedatainthehddbeforereplacing and to recover them after replacing. • tomaintainthesecurity,askuserstoperformthebackup/restoreforusers’data/informa...

  • Page 203

    45584901th rev.1 6-12 / oki data confidential [a] back up in hdd ask the user (machine administrator) to back up the data in the hdd. Refer to the table belowforthetypeofdata,availabilityandmethodofbackup. Type of data in hdd availability backup method image data in the e-filing available archivethe...

  • Page 204

    45584901th rev.1 6-13 / oki data confidential [d] erase hdd in case of the adi-hdd: (1) turnthepoweronwhilepressing[4]andthe[clear]buttonsimultaneously. (2) keyin[1]toselect“1:revertfactoryinstallstatushdd.”andthenpressthe[start] button. (3) turn the power off. [e] replace / format hdd (1) confirm t...

  • Page 205

    45584901th rev.1 6-14 / oki data confidential [f] reset user’s setting items and restore data/information ask the user (machine administrator) to reset the user’s setting items and to restore data or information. Refer to the following for the reset and restore: items to reset/restore method printer...

  • Page 206

    45584901th rev.1 6-15 / oki data confidential [i] adjust image quality (1) start up with the adjustment mode (05). (2) enterthepassword,andthenpressthe[ok]button. (ifthepasswordisnotsetforservice,pressthe[enter]buttonwithoutentering anything.) (3) perform“automaticgammaadjustment”(ppc)(05-7869). p....

  • Page 207

    45584901th rev.1 6-16 / oki data confidential 6.2.4 precautions and procedures when replacing the cu board a procedure for cu board replacement is shown below. [c] restore adi key start [a] return license [d] restore encryption key [g] reinstall license [f] update firmware version [h] check firmware...

  • Page 208

    45584901th rev.1 6-17 / oki data confidential (7) after10to40secondspasses,thescreenfornotifyingthesuccessofperformanceis displayed. Thenpressthe[ok]button.Ifthisscreenisnotdisplayedorthescreenfornotifying thefailureofperformanceisdisplayed,quitthisoperationbypressingthe[no]/[close] button.Then,chec...

  • Page 209

    45584901th rev.1 6-18 / oki data confidential [d] restore encryption key notes: if turning the power on while pressing [3] and the [clear] button simultaneously or restoring the key is not possible, update the system firmware using the download jig, and then perform this procedure again. p.8-20"8.4...

  • Page 210

    45584901th rev.1 6-19 / oki data confidential [g] reinstall license ifthelicensewasreturnedin"[a]returnlicense",reinstallitwiththefollowingprocedure. (1) turn the power on while pressing [0] and [8] simultaneously. (2) enterthepassword,andthenpressthe[ok]button. (ifthepasswordisnotsetforservice,pres...

  • Page 211

    45584901th rev.1 6-20 / oki data confidential 6.2.5 precautions and procedure when replacing the sram board (for the cu board) notes: do not replace the hdd and the sram board (for the cu board) together. Be careful not to damage the board when replacing the sram board. A procedure for replacing the...

  • Page 212

    45584901th rev.1 6-21 / oki data confidential [a] backup sram notes: if“[a]backupsram”fails,proceedto“[b]returnlicense”. If“[a]backupsram”succeeds,proceedto“[c]replacesramboard”. (1) turnthepoweronwhilepressing[6]andthe[clear]buttonsimultaneously. (2) when“sramclearmode”appearsonthelcd,keyin[0]tosel...

  • Page 213

    45584901th rev.1 6-22 / oki data confidential [c] replace sram board (1) confirm that the power is turned off. (2) take off the fax unit (gd-1340) if it is installed. (3) replace the sram board (for the cu board). p.6-6“6.1.5sramboard” [d] clear sram system storage area (1) turnthepoweronwhilepress...

  • Page 214

    45584901th rev.1 6-23 / oki data confidential [g] backup adi key iftheadi-hddisinstalled,followthestepsbelow.Toconfirmthetypeofdevice,startup theequipmentinthe4cmode. (1)turnthepoweronwhilepressing[3]andthe[clear]buttonsimultaneously. (2) enterthepassword,andthenpressthe[ok]button.(ifthepasswordisno...

  • Page 215

    45584901th rev.1 6-24 / oki data confidential [j] initialize sram board (1) start up with the setting mode (08). (2) initialize the sram error. 1.When“sramrequiresinitialization”isdisplayedonthelcd,checkthe destination and then press the [start] button. Ifthedestinationisnotcorrect,keyinthecorrecton...

  • Page 216

    45584901th rev.1 6-25 / oki data confidential [l] enable hdd encryption ifthehddencryptionfunctionisused,followtheprocedurebelow. (1) start up with the setting mode (08). (2) enterthepassword,andthenpressthe[ok]button. (ifthepasswordisnotsetforservice,pressthe[enter]buttonwithoutentering anything.) ...

  • Page 217

    45584901th rev.1 6-26 / oki data confidential 6.2.6 precautions and procedures when replacing the pu board refer to the hardware guide for the replacement procedure of the pu board. 6.2.7 precautions and procedures when replacing the su board refer to the hardware guide for the replacement procedure...

  • Page 218

    45584901th rev.1 6-27 / oki data confidential 6.2.9 licensere-registrationusingtheone-timedongle [1] re-registration when the board is replaced the license registered using the one-time dongle can be re-registered only in the same equipment.Whenthecuboardandsramboard(forcuboard)arereplaced,followthe...

  • Page 219

    45584901th rev.1 6-28 / oki data confidential (6) theremovescreenisdisplayed.Thenpressthe[yes]button. Ifthisscreenisnotdisplayed,checkthattheone-timedongleisinstalledinthe equipmentproperly. (7) after10to40secondshavepassed,thescreenfornotifyingthesuccessofthe performanceisdisplayed.Thenpressthe[ok]...

  • Page 220

    45584901th rev.1 6-29 / oki data confidential 6.3 precautions for installation of gp-1070 and disposal of hdd/ board 6.3.1 precautions for installation of gp-1070 wheninstallingthedataoverwriteenabler(gp-1070),performthefollowingsetting: 3c → 6. Erase hdd securely : hdd securely erasing this setting...

  • Page 221

    45584901th rev.1 7-1 / oki data confidential 7. Remote service there are following functions as remote service. 1. Auto supply order automaticallyordersthetonerbyfaxore-mail. 2. Service notification notifiesthestatusoftheequipmenttotheservicetechnicianbye-mailorfax. 7.1 auto supply order 7.1.1 outli...

  • Page 222

    45584901th rev.1 7-2 / oki data confidential (2) touch panel setting each item is set from the auto supply order screen on the touch panel. Enteringthepasswordandcustomerinformationisrequiredbecausethesettingismade from the admin screen. Setting it with the administrator is a must. • basicsetting [a...

  • Page 223

    45584901th rev.1 7-3 / oki data confidential • e-mailinformationofthisequipment(commoninformation) [admin]>[e-mail] from address e-mailaddressofthisequipment(*) from name e-mailusernameofthisequipment * whensendingane-mail,validityoftheaddressischecked.Iftheaddressisinvalid,itisnot sent. (3) output ...

  • Page 224

    45584901th rev.1 7-4 / oki data confidential 7.1.3 setting procedure (1) startuptheself-diagnosissettingmode08-9783,andthenchangethesettingvalueto“0”. (2) turnthepoweroff,andthenon. (3) press the [setting] button to enter the user function screen. (4) press the [admin] button. Fig.7-1 whentheadminis...

  • Page 225

    45584901th rev.1 7-5 / oki data confidential (7) theservicescreenisdisplayed. Fig. 7-3 (8) pressthe[supplyordersetup]button. Fig. 7-4 (9) press the [order information] button. (10) the order information screen is displayed. Fig. 7-5.

  • Page 226

    45584901th rev.1 7-6 / oki data confidential (11)pressthebuttonsonthescreenoforderinformationtosettherequireditem. [fax]/[mail]/[off] selectthe[fax]orthe[mail]buttonforthetransmittingwayof order. (http has not been supported yet.) [off]:turnofftheautosupplyorderfunction. [faxnumber] inputthefaxnumbe...

  • Page 227

    45584901th rev.1 7-7 / oki data confidential (16)theservicescreenisdisplayed. Fig. 7-7 (17)pressthe[serviceinformation]button. (18)thecustomer/servicetechnicianscreenisdisplayed. Fig. 7-8 (19)pressthebuttonsofthescreenofcustomer/servicetechniciantosettherequired item. Customer [name] input the name ...

  • Page 228

    45584901th rev.1 7-8 / oki data confidential (20)pressthe[ok]buttontoregisterandcompletetheorderinformationsetting. (21)theservicescreenisreturned. Fig. 7-9 (22)pressthe[supplyordersetup]button. Fig. 7-10 (23) press the [toner ordering] button. (24) the toner ordering screen is displayed. Fig. 7-11.

  • Page 229

    45584901th rev.1 7-9 / oki data confidential (25)selecttheparttobeordered.(pressthe[yellow(y)]button.) fig. 7-12 (26) input the order information of toner. [part number] toner number [condition] the order is placed when the number of toner empty reaches the number specified for the condition. [quant...

  • Page 230

    45584901th rev.1 7-10 / oki data confidential (29)pressthe[magenta(m)]/[cyan(c)]/[black(k)]/[usedtonercontainer]button, and then input the order information in the same way. Fig. 7-14 (30)pressthe[ok]buttontoregistertheorderinformation. Notes: auto supply order setting is also available from the fol...

  • Page 231

    45584901th rev.1 7-11 / oki data confidential items 08 code contents resultprinting [off]/[always]/[onerror] 9782 0: off 1: always 2: on error yellow(y)toner [part number] 9773 maximum 20 digits yellow(y)toner [condition] 9775 1-99 yellow(y)toner [quantity] 9774 1-99 magenta(m) toner [part number] 9...

  • Page 232

    45584901th rev.1 7-12 / oki data confidential (33)pressthe[on]or[off]buttonin“servicenotification(deviceinfo). Whenthe[off]buttonispressed,allfunctionsrelatedservicenotification(deviceinfo) become ineffective. Fig. 7-15 (34)whenservicenotification(deviceinfo)issettoon,thescreentosetthenotificationda...

  • Page 233

    45584901th rev.1 7-13 / oki data confidential • notifydate1andnotifydate2([date]button) pressing the [date] button sets up to 2 dates on which you wand to send data. * this is not affected by the specified day of the week. Fig. 7-17 keyinthedate(acceptablevalues:0-31)in“notifydate1”or“notifydate2”an...

  • Page 234

    45584901th rev.1 7-14 / oki data confidential 7.1.4 order sheet format the sample of order sheet is as follows. (1) fax(thisformatisthesameasthatoftiffimageattachede-mail.) *1partnottobeorderedisnotoutput.(lessspacebetweenthelines) date & time :99-99-'99 99:99 customer number :xxx customer name :xxx...

  • Page 235

    45584901th rev.1 7-15 / oki data confidential (2) e-mail(tiffimageattachedwiththee-mailisthesameformatwiththatofthefaxorder sheet.) subject:supplyorderrequest *1partnottobeorderedisnotoutput.(lessspacebetweenthelines) date&time: '12-04-14 00:17 customer number: a1 machinename: mc7xx serialnumber: 12...

  • Page 236

    45584901th rev.1 7-16 / oki data confidential (3) result list *1partnottobeorderedisnotoutput.(lessspacebetweenthelines) order xxxxxxxxx date & time :99-99-'99 99:99 customer number :xxx customer name :xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx customer address :xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx customer...

  • Page 237

    45584901th rev.1 7-17 / oki data confidential toner cartridge: toner cartridge cyan:cyan magenta: magenta yellow:yellow black:black description area: remarks devicedescription: model name (mfp model name) serialnumber: serial number devicefaxnumber: fax number devicee-mailaddress: e-mail address pri...

  • Page 238

    45584901th rev.1 7-18 / oki data confidential 7.2 service notification 7.2.1 outline this function automatically notifies the status of the equipment to the service technician by e-mailorfax.Thefollowingthreearetheitemstobenotified. • totalcounternotification whenthisfunctioniseffective,itnotifiesea...

  • Page 239

    45584901th rev.1 7-19 / oki data confidential (2) pressthe[service]button. Fig. 7-23 (3) pressthe[servicenotification]button. Fig. 7-24 (4) pressthe[e-mail]or[fax]buttonin“servicenotification”. Whenthe[off]buttonispressed,allfunctionsrelatedservicenotificationbecome ineffective. Fig. 7-25.

  • Page 240

    45584901th rev.1 7-20 / oki data confidential (5) enterthee-mailaddressorfaxnumberofthedestination. Whenpressingthe[e-mail]button,thescreenisswitchedtoafullkeyboard.Then enterthee-mailaddressesandpressthe[ok]button.(maximum3addressescanbe set.) fig. 7-26 pressthe[faxnumber]button,keyinthefaxnumberan...

  • Page 241

    45584901th rev.1 7-21 / oki data confidential (6) press the [on] button to notify or the [off] button not to notify each item for e-mail and fax. Whentotalcounttransmitissettoon,thescreentosetthenotificationdateis displayed. Then set the notification date with the following procedure. Fig. 7-28 set ...

  • Page 242

    45584901th rev.1 7-22 / oki data confidential • notifydate1andnotifydate2([date]button) pressing the [date] button sets up to 2 dates on which you wand to send data. * this is not affected by the specified day of the week. Fig. 7-29 keyinthedate(acceptablevalues:0-31)in“notifydate1”or“notifydate2”an...

  • Page 243

    45584901th rev.1 7-23 / oki data confidential (7) pressthe[ok]button.Thesettingcompletes. Notes: service notification setting is also available from the following setting mode (08). Items 08 code contents service notification setting 9793 0:off(invalid)1:e-mail2:fax e-mail address 1 9794 maximum 192...

  • Page 244

    45584901th rev.1 7-24 / oki data confidential 7.2.3 items to be notified the items to be notified are shown below. 1. Total counter transmit by e-mail subject: counter notification 3 7 8 12 13 15 16 17 18 19 20 21 22 23 2 4 1 5 6 9 14 24 25 26 date : 04/26/2012 12:34 machine model : mc7xx serialnumb...

  • Page 245

    45584901th rev.1 7-25 / oki data confidential ① date ② machine model name ③ serial number ④ total counter value ⑤ supplier information ⑥ customer information ⑦ service technician information ⑧ count setting of large-sized paper (fee charging system counter) ⑨ definition setting of large-sized paper ...

  • Page 246

    45584901th rev.1 7-26 / oki data confidential 2. Totalcountertransmitbyfax sheet 1 3 2 4 1 5 6 7 counter notification (*1) date : 12/04/14 13:47 machine model : mc7xx serial number : 1234567890 total counter : 00004787 customer name : customer_name customer address : customer_address customer tel nu...

  • Page 247

    45584901th rev.1 7-27 / oki data confidential sheet 3 64 printer error history date time error code counter date time error code counter 08/04/13 16:44 f110 00000000 08/04/13 16:44 f110 00000000 08/04/12 22:28 f110 00000000 08/04/13 16:44 f110 00000000 08/04/12 22:23 f110 00000000 08/04/13 16:44 f11...

  • Page 248

    45584901th rev.1 7-28 / oki data confidential numberofscanningpagesinthefaxfunction(black) numberofscanningpagesinthenetworkscanningfunction(black) numberoftransmittedpagesinthefaxfunction(black) numberofreceivedpagesinthefaxfunction(black) history of error *2 the latest 20 errors are displayed. Ton...

  • Page 249

    45584901th rev.1 7-29 / oki data confidential 3. Toner near-empty notification by e-mail subject: toner near-empty notification date : 04/26/2012 12:34 machine model : mc7xx serialnumber : 1234567890 total counter : 00004787 supplier: name : supplier_name fax number : 1122334455 e-mail : supplier_em...

  • Page 250

    45584901th rev.1 7-30 / oki data confidential 1. Date 2. Machine model name 3. Serial number 4. Total counter value 5. Supplier information 6. Customer information 7. Service technician information 8. Count setting of large-sized paper (fee charging system counter) 9. Definition setting of large-siz...

  • Page 251

    45584901th rev.1 7-31 / oki data confidential 4. Tonernear-emptynotificationbyfax sheet 1 1 2 3 4 5 6 7 toner near-empty notification (*1) date : 12/04/14 13:47 machine model : mc7xx serial number : 1234567890 total counter : 00004787 customer name : customer_name customer address : customer_address...

  • Page 252

    45584901th rev.1 7-32 / oki data confidential sheet 3 41 42 43 44 35 36 37 38 39 40 toner cartridge information: toner near-empty counter setting 00000000 current 00000000 color code 1 point of destination 0 used history developer counter 00000056 developer driving time 00000057 drum driving time 00...

  • Page 253

    45584901th rev.1 7-33 / oki data confidential 39. Color of toner cartridge 1: black 2:yellow 3: magenta 4: cyan 40. Destination setting of toner cartridge *2 the latest 20 errors are displayed. 41. Tonerremainingquantity(yellow) 42. Tonerremainingquantity(magenta) 43. Tonerremainingquantity(cyan) 44...

  • Page 254

    45584901th rev.1 7-34 / oki data confidential 5. Service call transmit subject: service call notification 12 13 14 15 4 5 6 1 2 3 7 8 9 10 11 date: 04/14/2012 13:47 machine name: mc7xx serialnumber:1234567890 function: printer severity: error errorcode: xxxx message: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx...

  • Page 255

    45584901th rev.1 7-35 / oki data confidential ① date(whenanerroroccurs) ② machine model name ③ serial number ④ function:fixedat“printer” ⑤ severity:fixedat“error” ⑥ error code ⑦ error message: the content of error is displayed. ⑧ supplier information ⑨ customer information ⑩ service technician infor...

  • Page 256

    45584901th rev.1 8-1 / oki data confidential 8. Firmware updating 8.1 overview whenyouwanttoupdatethefirmwaretothelatestoneortheequipmentbecomesinoperable duetosomedefectinthefirmware,updatingcanbeperformedasfollows. Note! Odc does not support use of the download jig. Equipment firmware updating met...

  • Page 257

    45584901th rev.1 8-2 / oki data confidential b. Fig.8-2 b system firmware p. 8-23 c. Fig.8-3 c faxfirmware(gd-1340) p. 8-26 notes: • writtenfirmwarevariesdependingonthekindsoftheboardsprovidedasserviceparts.For updating,onlytheminimumfirmwareisinstalledonthesystemcontrolpcboard,logicpc board,andscan...

  • Page 258

    45584901th rev.1 8-3 / oki data confidential 8.2 firmware updating with usb device toupdatefirmware,storeupdateprogramandfirmwaredatafilesintheusbdevice. The update program is“signatures.Sig”, and it needs to be stored in the usb device. It is necessary for updating firmware except that of the syste...

  • Page 259

    45584901th rev.1 8-4 / oki data confidential important: • onlytheusbdeviceswhichmeetthefollowingconditionsshouldbeusedforupdating.Be careful since updating with any device other than the above is never guaranteed. - acombinationusbdevicewithaflashmemory(tobeconnecteddirectlytotheusbport) and its cap...

  • Page 260

    45584901th rev.1 8-5 / oki data confidential 8.2.2 update procedure important: • thefilesystemofusbdeviceshouldbeformattedinthefatorfat32format.Becareful since the devices formatted in ntfs or other format will not be able to be operated. The file system can be confirmed on the device properties in ...

  • Page 262

    45584901th rev.1 8-7 / oki data confidential notes: • thedisplayofitemsonthisscreenvariesdependingonthetypesofdatawritten on the usb device. Each item is displayed only when each data file is written on the usb device in the following conditions. Item condition 1.Systemfirmware (os data) o280sf0wxxx...

  • Page 263

    45584901th rev.1 8-8 / oki data confidential (7) press the [start] button. Updatingstartsandtheprocessingstatusisdisplayedonthelcdscreen. Status display during update status display when update is completed systemfirmware(osdata) update in progress systemfirmware(osdata) completed enginefirmware upd...

  • Page 264

    45584901th rev.1 8-9 / oki data confidential notes: • “updatefailed.”isdisplayedatthebottomofthelcdscreenwhentheupdating isnotcompletedproperly.“failed”appearsnexttothefaileditemonthestatus display.Eventhoughanupdatefails,donotturnthepoweroffuntilother updatesarefinished.If“updatefailed”appearsatthe...

  • Page 265

    45584901th rev.1 8-10 / oki data confidential • whenapufirmwareupdateerrororsufirmwareupdateerroroccurs,“update failed”or“failed”appearsonthescreenandtheerrornumberanderrormessage appearnexttothemessage.Fordetailsofeacherror,refertothefollowingtables. Pu firmware update error error number error mess...

  • Page 266

    45584901th rev.1 8-11 / oki data confidential (9) pressthe[power]buttontoshutdowntheequipment,andthenremovetheusb device. (10) perform the initialization of the updating data. • pressthe[power]buttonwhilesimultaneouslyholdingdownthe[0]and[8] buttons. • keyin“9030”,andthenpressthe[start]button. • pre...

  • Page 267

    45584901th rev.1 8-12 / oki data confidential during the update,“update in progress” is displayed on the right of each item. After it is completed,“completed” is displayed there. Example screens of the system firmware updateareasfollows,andthesearethesameforotherfirmware. Firmware update mode system...

  • Page 268

    45584901th rev.1 8-13 / oki data confidential 8.3 patch updating with usb device system firmware and system software can be updated in a shorter time than normal update using the data file for the patch update. Notes: whenperformingtheupdate,usethelatestprogram. 8.3.1 firmware type and data file nam...

  • Page 269

    45584901th rev.1 8-14 / oki data confidential important: • onlytheusbdeviceswhichmeetthefollowingconditionsshouldbeusedforupdating.Be careful since updating with any device other than the above is never guaranteed. - acombinationusbdevicewithaflashmemory(tobeconnecteddirectlytotheusbport) and its ca...

  • Page 270

    45584901th rev.1 8-15 / oki data confidential 8.3.2 update procedure important: • thefilesystemofusbdeviceshouldbeformattedinthefatorfat32format.Becareful since the devices formatted in ntfs or other format will not be able to be operated. The file system can be confirmed on the device properties in...

  • Page 272

    45584901th rev.1 8-17 / oki data confidential notes: • thedisplayofitemsonthisscreenvariesdependingonthetypesofdatawritten on the usb device. Each item is displayed only when each data file is written on the usb device in the following conditions. Item condition 1.Systemfirmware(osdata) o280sfpwxxxx...

  • Page 273

    45584901th rev.1 8-18 / oki data confidential (7) press the [start] button. Updatingstartsandtheprocessingstatusisdisplayedonthelcdscreen. Thefollowscreenshowsthedisplaywhenselecting“1.Systemfirmware(os data)”intheupdateselectionmenu.“updateinprogress”isdisplayedontherightside oftheselecteditem,andt...

  • Page 274

    45584901th rev.1 8-19 / oki data confidential notes: • “updatefailed.”isdisplayedatthebottomofthelcdscreenwhentheupdating isnotcompletedproperly.“failed”appearsnexttothefaileditemonthestatus display.Eventhoughanupdatefails,donotturnthepoweroffuntilother updatesarefinished.If“updatefailed”appearsatth...

  • Page 275

    45584901th rev.1 8-20 / oki data confidential 8.4 firmware updating with pwa-dwnld-jig2 the data to be overwritten by this update are as follows. Whenthecuboardisreplaced,updatetheromdatawrittenoncuboardasnecessary. Equipment firmware updating method system firmware system control pc board (cu board...

  • Page 276

    45584901th rev.1 8-21 / oki data confidential 8.4.1 writingthedatatothedownloadjig(pwa-dwnld-jig2) thedownloadjig(pwa-dwnld-jig2)isthatinwhichtheflashromismountedontheboard directly.The rom writer adapter (pwa-dl-adp-350) is required to write data to these flash roms. Connect the download jig with t...

  • Page 277

    45584901th rev.1 8-22 / oki data confidential [a] precautions when writing the system firmware data • setthewritingvoltage(vid)to3.3v. Whenanerrorappearswhilethedataarebeingwrittentothedownloadjig,setthe writingvoltage(vid)to12vandthenwritethem. • whenwritingthedata,settheaddressfrom0to3fffff.Thedat...

  • Page 278

    45584901th rev.1 8-23 / oki data confidential 8.4.2 system firmware thesystemfirmwarecanbeupdatedindividuallybyusingpwa-dwnld-jig2. Important: • besuretoshutdowntheequipmentbeforeinstallingandremovingthedownloadjig. • donotshutdowntheequipmentduringtheupdate.Thedatacouldbedamagedandnotbe able to be ...

  • Page 279

    45584901th rev.1 8-24 / oki data confidential (14) restore the key and license data by following the steps below. • restorethekeydatabypressingthe[1]keytoselect“1.Keysramtofrom”,then press the [start] button. • ifthestateof“fromlicencestatus”is“keymismatch”,restorethelicensedataby pressingthe[3]keyt...

  • Page 280

    45584901th rev.1 8-25 / oki data confidential 8.5 firmware updating with k-pwa-dlm-320 the firmware of the option (fax rom) can be updated individually by using k-pwa-dlm- 320f. Update the rom data written on each board according to the need such as the case of replacing the board. Options model nam...

  • Page 281

    45584901th rev.1 8-26 / oki data confidential 8.5.1 faxunitfirmware(gd-1340) important: • before updating the fax firmware, make sure to print out the current function list for maintenance, function list (admin), address book list and group number information. In case the updating is failed and the ...

  • Page 282

    45584901th rev.1 8-27 / oki data confidential (7) turnthepoweroffusingthemainpowerswitchoftheequipment,removethe downloadjig,andtheninstalltherightsidecover. (8) inthefaxclearingmode,performthe“faxsetup”. • confirmthedestinationsettingiscorrectinthesettingmode(08). 08-9000:destinationsettingoftheequ...

  • Page 283

    45584901th rev.1 8-28 / oki data confidential 8.6 confirmation of the updated data aftertheupdatingiscompleted,checkeachdataversioninsettingmode(08)toconfirmthat the data were overwritten properly. Firmware code remarks updating system firmware 08-9930 system firmware version updating pu firmware 08...

  • Page 284

    45584901th rev.1 8-29 / oki data confidential 8.7 when firmware updating fails when the equipment was shut down during firmware updating or it could not be started after updatingforsomereason,performfirmwareupdatingagainfollowingtheprocedurebelow. 8.7.1 procedure (1) update“systemfirmware“ofthesyste...

  • Page 285

    45584901th rev.1 8-30 / oki data confidential 8.7.2 flow chart for correcting usb update failure [a] when the update of the system firmware failed usb update failed update completed update download jig. Check system firmware version. (08-9930) update succeeded? Replace cu board. Is system firmware v...

  • Page 286

    45584901th rev.1 8-31 / oki data confidential [b] when the update of system software failed check hdd harness connection. Replace hdd. Yes yes yes yes no no no no usb update failed failed twice or more? Update usb. Update succeeded? Check system software version. (08-9900) " 11.5 confirmation of the...

  • Page 287

    45584901th rev.1 9-1 / oki data confidential 9. Backup function 9.1 data cloning 9.1.1 general description data cloning is a function that backs up user data, setting data and sram data into a usb deviceandalsorestoresthesedataintotheequipment. Thisfunctionbacksuporrestoresthedataofthesameequipment(...

  • Page 288

    45584901th rev.1 9-2 / oki data confidential 9.1.3 backup files the following files are saved in the root directory of the usb device by backing up. Filename remark modelname_mfpserialno_yyyy-mm-dd_ hh-mm e.G.:whenbackupwasperformedat13:59on october1st,2010. T280_cuk911379_2010-10-01_13-59 9.1.4 clo...

  • Page 289

    45584901th rev.1 9-3 / oki data confidential [b] restore procedure (1) pressthe[power]buttontoshutdowntheequipment. (2) connect the usb device [1] to the usb port [2] on the right upper cover. [2] [1] fig. 9-4 notes: backing up cannot be performed with multiple usb device [1] connected at the same t...

  • Page 290

    45584901th rev.1 9-4 / oki data confidential [c] confirmation of the error “backupfailed”or“restorefailed”isdisplayedonthelowerleftpartofthelcdscreen when the data have not been properly backed up or restored. Moreover,detailsofanerroraredisplayedundertheabovemessage. (thefollowingisanexamplescreenw...

  • Page 291

    45584901th rev.1 9-5 / oki data confidential 9.2 aes data encryption function setting 9.2.1 general description data encryption is a function that encrypts data in the hdd to enhance the security. Notethatthisfunctionmayaffecttheequipmentperformance. 9.2.2 precautions whenthedataencryptionfunctionis...

  • Page 292

    45584901th rev.1 9-6 / oki data confidential 9.2.3 setting procedure a procedure for setting the data encryption function is shown below. Start [a] back up data in hdd [c] print out "function" list [d] erase hdd [e] reset user's setting item and restore data/information [f] reset "function list for ...

  • Page 293

    45584901th rev.1 9-7 / oki data confidential [a] back up in hdd ask the user (machine administrator) to back up the data in the hdd. Refer to the table belowforthetypeofdata,availabilityandmethodofbackup. Type of data in hdd availability backup method image data in the e-filing available archivethem...

  • Page 294

    45584901th rev.1 9-8 / oki data confidential [c] print out “function” list (1) press the [setting] button. (2) pressthe[admin]button,enterthepassword,andthenpressthe[enter]button. (3) pressthe[list/report]buttonandthenthe[list]button. (4) pressthe[function]button.The“function”listisprintedout. Notes...

  • Page 295

    45584901th rev.1 9-9 / oki data confidential [f] reset “function list for maintenance” (1) printoutthe“functionlistformaintenance”listaftertheformatting. (2) whilepressing[1]and[3]simultaneously,turnthepoweron.(functionmode) (3) compare the lists which were printed before and after the formatting to...

  • Page 296

    45584901th rev.1 9-10 / oki data confidential 9.2.4 procedure for disabling data encryption function thebasicprocedureisthesameastheoneforenablingthisfunction.Todisableit,set“0(invalid)” in the code 08-9379 at step p.9-8“[d]enabledataencryptionfunction”. 9.2.5 procedure for discarding hdd when data...

  • Page 297

    45584901th rev.1 9-11 / oki data confidential 9.3 high security mode 9.3.1 general description the high security mode is a security mode complying with the ieee2600.1 security standards requirement.Tohavetheequipmententerthismode,followtheprocedureandtheprecautions below. 9.3.2 prior confirmation • ...

  • Page 298

    45584901th rev.1 9-12 / oki data confidential 9.3.4 precautions • in the high security mode, an integrity check system is operated at every restart. If f521 (integritycheckerror)isdisplayed,takethenecessarymeasuresfollowingthetroubleshooting procedure. • whenaself-diagnosticmodeisstartedinthehighsec...

  • Page 299

    45584901th rev.1 10-1 / oki data confidential 10. External counters 10.1 outline thischapterdescribestheinterfacebetweentheequipmentandcoincontroller.Thisequipment does not support card controller and mechanical counter. 10.2 signal notes: • use24vsuppliedfromthemainequipmentaspowerfortheoutputsigna...

  • Page 300

    45584901th rev.1 10-2 / oki data confidential 2. Connector on the cu board: cn110 (jst-made b7b-ph-sm4) (coin controller) pin no. I/o signal name function voltagelevel remarks gq- 1260 1 out large/ small paper size signal open collector l:largesize in use 2 out full color full color mode signal open...

  • Page 301

    45584901th rev.1 10-3 / oki data confidential 10.2.2 details of the signals 1. Ctron signal (output signals) thesesignalsaresynchronizedwithelectroniccounteroftheequipmentandtheybecome “low”whenonesheetofpaperiscountedup.Theyarethesignalsforcoincontroller,and outputfromthelgcboard. Off on fixed time...

  • Page 302

    45584901th rev.1 10-4 / oki data confidential 5.Bkctrsignal,mnctrsignal,flctrsignal(outputsignals) these signals become“low” (on) synchronizing with the ctron signal according to the copying mode used. The pulse width corresponds to the fixed time. Though the ctron signalissetto“doublecount”,theyare...

  • Page 303

    45584901th rev.1 10-5 / oki data confidential 10.3 notices 10.3.1 setting code each signal will be enabled by configuring the setting code“08-9016” (counter installed externally). 08-9016 0: no external counter (default) 1: coin controller 5: coin controller supporting acs 10.3.2 setting value chang...

  • Page 304

    45584901th rev.1 11-1 / oki data confidential 11. Self-diagnosis code (03/04/05/08 code) test mode (03)/test print mode (04) input check (test mode 03) items to be checked and the condition of the equipment when the buttons [a] to [h] are highlighted are listed on the following pages. [fax]button:of...

  • Page 305

    45584901th rev.1 11-2 / oki data confidential output check (test mode 03) code function procedure 301 modem test 2100hz 2 302 modemtest14.4kbps(v17) 2 303 modemtest9.6kbps(v29) 2 304 modemtest4.8kbps(v27) 2 305 modem test 300bps 2 306 modem test 1850hz 2 307 modem test 1650hz 2 308 modem test 1100hz...

  • Page 306

    45584901th rev.1 11-3 / oki data confidential test print mode (test mode 04) code types of test pattern remarks remarks output from 33 overall halftone for printer (image) sizea4/lt 5 sys 36 printer secondary scanning direction 32 gradation steps (image) sizea4/lt 1 sys.

  • Page 307

    45584901th rev.1 11-4 / oki data confidential adjustment mode (05) codes 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode printer feeding system/ paper transport setting method of tray size 4800 0 1st tray 1...

  • Page 308

    45584901th rev.1 11-5 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode printer image control density correction fine adjustment of density correction 4903 0 cyan 16 13~19 pu 13: -3 14...

  • Page 309

    45584901th rev.1 11-6 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode printer image control fine adjustment for printing plain paper 4908 1 color 2 0~4 pu 0: -2 1: -1 2: 0 3: 1 4: 2 ...

  • Page 310

    45584901th rev.1 11-7 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing sharpness adjustment ppc(black) 7056 text/photo 128 0-255 sys thelargerthevalue,thesharperthe...

  • Page 311

    45584901th rev.1 11-8 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment ppc(black) automatic density adjustment 7123 text/photo 128 0-255 sys thel...

  • Page 312

    45584901th rev.1 11-9 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment ppc(black) photo 7192 1 medium density 128 0-255 sys thelargertheval...

  • Page 313

    45584901th rev.1 11-10 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment ppc(black) user custom 7276 2 high density 128 0-255 sys thelargert...

  • Page 314

    45584901th rev.1 11-11 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment prt(black) ps/detail/1200dpi 7310 1 medium density 128 0-255 sys wh...

  • Page 315

    45584901th rev.1 11-12 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment prt(black) xps/smooth/ 600dpi 7319 0 lowdensity 128 0-255 sys whent...

  • Page 316

    45584901th rev.1 11-13 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing led emission level adjustment prt(black) 7330 3 emission level 3/4 191 0-255 sys the smaller...

  • Page 317

    45584901th rev.1 11-14 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment monochrome/ 600dpi/auto ps/image 7362 2 high density 128 0-255 sys ...

  • Page 318

    45584901th rev.1 11-15 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment monochrome/ 600dpi/auto xps/graphics 7367 1 medium density 128 0-25...

  • Page 319

    45584901th rev.1 11-16 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment scn(black) manual adjustment/ center value 7444 text/photo 128 0-255 sys ...

  • Page 320

    45584901th rev.1 11-17 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing gamma balance adjustment scn(black) text/photo 7485 0 lowdensity 128 0-255 sys thelargerthev...

  • Page 321

    45584901th rev.1 11-18 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment fax(black) automatic density adjustment 7543 photo 128 0-255 sys thelarge...

  • Page 322

    45584901th rev.1 11-19 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing black area adj. In twin color copy mode ppc(color) black and red 7642 0 high density 128 0-2...

  • Page 323

    45584901th rev.1 11-20 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing copy color adjustment mono color yellowgreen 7646 0 y 128 0-255 sys performs the density adj...

  • Page 324

    45584901th rev.1 11-21 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing copy color adjustment mono color pink 7648 3 k 128 0-255 sys performs the density adjustment...

  • Page 325

    45584901th rev.1 11-22 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing copy color adjustment mono color / twin color green 7651 2 c 128 0-255 sys performs the dens...

  • Page 326

    45584901th rev.1 11-23 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing back- ground adjustment ppc(color) 7657 text 128 0-255 sys thelargerthevalue,thedarkerthebac...

  • Page 327

    45584901th rev.1 11-24 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of hue ppc(color) text 7666 3 cyan 128 0-255 sys thelargerthevalue,thedarker...

  • Page 328

    45584901th rev.1 11-25 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of hue ppc(color) photo (developing paper) 7668 5 magenta 128 0-255 sys thel...

  • Page 329

    45584901th rev.1 11-26 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of saturation ppc(color) text/photo 7675 1 yellow 128 0-255 sys inputthelarg...

  • Page 330

    45584901th rev.1 11-27 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of saturation ppc(color) photo 7677 0 red 128 0-255 sys inputthelargervaluet...

  • Page 331

    45584901th rev.1 11-28 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of saturation ppc(color) photo (developing paper) 7678 5 magenta 128 0-255 s...

  • Page 332

    45584901th rev.1 11-29 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of saturation ppc(color) user custom 7680 4 blue 128 0-255 sys inputthelarge...

  • Page 333

    45584901th rev.1 11-30 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment ppc(color) manual adjustment/ center value 7717 map 128 0-255 sys thelarg...

  • Page 334

    45584901th rev.1 11-31 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment twin color manual adjustment/ center value 7733 text/photo 128 0-255 sys ...

  • Page 335

    45584901th rev.1 11-32 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing sharpness adjustment ppc(color) mono color 7803 printed image 128 0-255 sys thelargerthevalu...

  • Page 336

    45584901th rev.1 11-33 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing marker color adjustment 7850 2 ppc(color) "c" 3 0-6 sys the color of the one-touch adjustmen...

  • Page 337

    45584901th rev.1 11-34 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing automatic gamma adjustment ppc(color) color/black 7871 6 thick paper4 - - sys whencolordevia...

  • Page 338

    45584901th rev.1 11-35 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density adjustment ppc(color) 7902 plain paper 255 0-255 sys thesmallerthevalu...

  • Page 339

    45584901th rev.1 11-36 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold setting ppc(color) 7913 2 thick paper 5 128 0-255 sys thelar...

  • Page 340

    45584901th rev.1 11-37 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold setting ppc(color) 7913 11 envelope 128 0-255 sys thelargert...

  • Page 341

    45584901th rev.1 11-38 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment ppc(color)"y" printed image 7962 2 high density 128 0-255 sys theta...

  • Page 342

    45584901th rev.1 11-39 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment ppc(color) "m" printed image 7967 1 medium density 128 0-255 sys th...

  • Page 343

    45584901th rev.1 11-40 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment ppc(color) "c" printed image 7972 0 lowdensity 128 0-255 sys thetar...

  • Page 344

    45584901th rev.1 11-41 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment ppc(color)"k" text 7976 2 high density 128 0-255 sys thetargetcolor...

  • Page 345

    45584901th rev.1 11-42 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment ppc(color) "m" user custom 7981 1 medium density 128 0-255 sys thet...

  • Page 346

    45584901th rev.1 11-43 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing automatic gamma adjustment prt(color) 600dpi 8004 5 thick paper3 - - sys whencolordeviationi...

  • Page 347

    45584901th rev.1 11-44 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing automatic gamma adjustment prt(color) 1200dpi 8005 5 thick paper3 - - sys whencolordeviation...

  • Page 348

    45584901th rev.1 11-45 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing back- ground adjustment prt(color) smooth/color/ 600dpi 8010 2 xps 128 0-255 sys thelargerth...

  • Page 349

    45584901th rev.1 11-46 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing back- ground adjustment prt(color) detail/twin color/ 600dpi 8014 1 pcl 128 0-255 sys thelar...

  • Page 350

    45584901th rev.1 11-47 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment 2 color printing/ prt(color)"k" 8023 2 high density 128 0-255 sys t...

  • Page 351

    45584901th rev.1 11-48 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment 2 color printing/ prt(color) "m" m 8028 1 medium density 128 0-255 ...

  • Page 352

    45584901th rev.1 11-49 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment 2 color printing/ prt(color) "red" y 8033 0 lowdensity 128 0-255 sy...

  • Page 353

    45584901th rev.1 11-50 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment 2 color printing/ prt(color) "green" m 8037 2 high density 128 0-25...

  • Page 354

    45584901th rev.1 11-51 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color)"y" xps/smooth/ 600dpi 8042 1 medium density 128 0-255 sy...

  • Page 355

    45584901th rev.1 11-52 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color) "m" xps/detail/600dpi 8047 0 lowdensity 128 0-255 sys th...

  • Page 356

    45584901th rev.1 11-53 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color) "m" ps/smooth/600dpi 8051 2 high density 128 0-255 sys t...

  • Page 357

    45584901th rev.1 11-54 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color) "c" ps/detail/600dpi 8056 1 medium density 128 0-255 sys...

  • Page 358

    45584901th rev.1 11-55 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color)"k" pcl/smooth/ 600dpi 8061 0 lowdensity 128 0-255 sys th...

  • Page 359

    45584901th rev.1 11-56 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color)"k" pcl/detail/600dpi 8065 2 high density 128 0-255 sys t...

  • Page 360

    45584901th rev.1 11-57 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold adj. Prt(color/600 dpi) detail 8070 8 special paper 4-6 128 ...

  • Page 361

    45584901th rev.1 11-58 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold adj. Prt(color/600 dpi) smooth 8071 5 thick paper3 128 0-255...

  • Page 362

    45584901th rev.1 11-59 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold adj. Prt(color/1200 dpi) detail 8089 2 thick paper 5 128 0-2...

  • Page 363

    45584901th rev.1 11-60 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold adj. Prt(color/1200 dpi) detail 8089 11 envelope 128 0-255 s...

  • Page 364

    45584901th rev.1 11-61 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing maximum toner density threshold adj. Prt(color/1200 dpi) smooth 8090 8 special paper 4-6 128...

  • Page 365

    45584901th rev.1 11-62 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing sharpness adjustment prt(color) e-bridge/ps/ twin color 8108 2 photo 128 0-255 sys thelarger...

  • Page 366

    45584901th rev.1 11-63 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing sharpness adjustment prt(black) e-bridge/ps 8118 0 text 128 0-255 sys thelargerthevalue,thes...

  • Page 367

    45584901th rev.1 11-64 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing upper limit value in toner saving mode prt color/two- color 600 dpi 8160 2 xps 176 0-255 sys...

  • Page 368

    45584901th rev.1 11-65 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing pure black/gray threshold adjustment prt(color) pcl/image 8212 0 general 1 1-255 sys thelarg...

  • Page 369

    45584901th rev.1 11-66 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing stroke adjustment ps/pdf automatic stroke adjustment 600dpi 8239 1 minimum stroke width when...

  • Page 370

    45584901th rev.1 11-67 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing linewidth minimum value adjustment prt(color) 8241 1200dpi 2 1-9 sys thelargerthevalue,theda...

  • Page 371

    45584901th rev.1 11-68 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing pure black/gray threshold adjustment prt(color) xps/text 8249 2 presentation 8 1-255 sys the...

  • Page 372

    45584901th rev.1 11-69 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing pure black/gray threshold adjustment prt(color) xps/image 8251 3 lineart 8 1-255 sys thelarg...

  • Page 373

    45584901th rev.1 11-70 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing pure black/gray threshold adjustment prt(color) ps/graphic 8253 4 advanced 1 1-255 sys thela...

  • Page 374

    45584901th rev.1 11-71 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color) ps/smooth/ 1200dpi/c 8270 0 lowdensity 128 0-255 sys whe...

  • Page 375

    45584901th rev.1 11-72 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing color balance adjustment prt(color) ps/detail/1200dpi/ c 8274 2 high density 128 0-255 sys w...

  • Page 376

    45584901th rev.1 11-73 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing fine adjustment of black density scn(color) 8315 text 0 0-4 sys thelargerthevalue,thedarkert...

  • Page 377

    45584901th rev.1 11-74 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode image proce- ssing density adjustment scn(color) manual adjustment/ center value 8341 photo 128 0-255 sys thela...

  • Page 378

    45584901th rev.1 11-75 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 05 adjustment mode system mainte- nance 9960 display of equipment information (sram) refer to contents 0-2 sys displaystheequipmen...

  • Page 379

    45584901th rev.1 11-76 / oki data confidential setting mode (08) codes 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface card reading device 3500 device setting 0006 0001 0- 4294967295 sys ...

  • Page 380

    45584901th rev.1 11-77 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface card reading device 3502 card reader format information -2 0 0- 4294967295 sys the data of t...

  • Page 381

    45584901th rev.1 11-78 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general available profile display prt 3600 8 sh_is34_08.Icc - - sys displays pg device pure gray trc attrib...

  • Page 382

    45584901th rev.1 11-79 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general available profile display prt 3600 28 sh_is34_28.Icc - - sys displays pg device pure gray trc attri...

  • Page 383

    45584901th rev.1 11-80 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general available profile display prt 3600 48 sh_is34_48.Icc - - sys displays pg device pure gray trc attri...

  • Page 384

    45584901th rev.1 11-81 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3604 5 sh_is34_05.000 - - sys displays ...

  • Page 385

    45584901th rev.1 11-82 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3604 19 sh_is34_19.000 - - sys displays...

  • Page 386

    45584901th rev.1 11-83 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3604 33 sh_is34_33.000 - - sys displays...

  • Page 387

    45584901th rev.1 11-84 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3604 47 sh_is34_47.000 - - sys displays...

  • Page 388

    45584901th rev.1 11-85 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3608 2 sh_is34_02.001 - - sys displays ...

  • Page 389

    45584901th rev.1 11-86 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3608 16 sh_is34_16.001 - - sys displays...

  • Page 390

    45584901th rev.1 11-87 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3608 30 sh_is34_30.001 - - sys displays...

  • Page 391

    45584901th rev.1 11-88 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general displaying the attribute of the profile at the shipment prt 3608 44 sh_is34_44.001 - - sys displays...

  • Page 392

    45584901th rev.1 11-89 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general real time log notification function 3626 department information transmission setting 0 0-1 sys sets...

  • Page 393

    45584901th rev.1 11-90 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 3720 windowsdomain no.3 of user authentication - - uty maximum 128 letters 12 08 setting mode syste...

  • Page 394

    45584901th rev.1 11-91 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 3743 ldapclient timeout 5 1-180 nic usewhenatimeoutoccurredatldapclientconnection 12 08 setting mod...

  • Page 395

    45584901th rev.1 11-92 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 3778 acquiringdhcpv6 option 2 1-2 nic whenstatelessaddressisselected,anoptionis acquiredfromdhcpv6s...

  • Page 396

    45584901th rev.1 11-93 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system scanner 3805 department management setting by remote scan 3 0-3 sys sets the department management with rem...

  • Page 397

    45584901th rev.1 11-94 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system scanner pdf file 3817 versionsetting 0 0-1 sys the version of pdf file produced by the scan function is set...

  • Page 398

    45584901th rev.1 11-95 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general summer time start 3856 day of the week 0 0-6 sys 0:sun1:mon2:tue3:wed4:thu5:fri6:sat 1 08 setting m...

  • Page 399

    45584901th rev.1 11-96 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode printer paper feeding automatic change of paper source whenatrayis specified 4016 0 ppc 0 0-1 sys sets whether the...

  • Page 400

    45584901th rev.1 11-97 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode printer paper feeding paper size setting 4104 lcf refer to contents 0-255 sys pressthebuttononthelcdtoselectthesiz...

  • Page 401

    45584901th rev.1 11-98 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter printer full color 6061 0 large 0 8 digits sys counts the number of output pages at the full color mode in...

  • Page 402

    45584901th rev.1 11-99 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter copy print black 6063 1 small 0 8 digits sys counts the number of output pages at the black mode in the co...

  • Page 403

    45584901th rev.1 11-100 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter fax print black 6066 0 large 0 8 digits sys countsthenumberofoutputpagesinthefaxfunction according to its...

  • Page 404

    45584901th rev.1 11-101 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter nw scanning full color 6068 1 small 0 8 digits sys counts the number of scanning pages at the full color ...

  • Page 405

    45584901th rev.1 11-102 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter fax scanning black 6071 0 large 0 8 digits sys countsthenumberofscanningpagesinthefax function according ...

  • Page 406

    45584901th rev.1 11-103 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter fax transmission black 6073 1 small 0 8 digits sys countsthenumberoftransmittedpagesinthefax function acc...

  • Page 407

    45584901th rev.1 11-104 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter double count for charging paper type 6083 2 special1(label1)/ special2(label2)/ special3 (transparency) /...

  • Page 408

    45584901th rev.1 11-105 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode counter counter settings color/blackquota selection 6087 twin/mono color count 0 0-1 sys whenthepagesarecountedfo...

  • Page 409

    45584901th rev.1 11-106 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode image proce- ssing automatic tone correction data lastupdateddate and time color ppc 7052 5 thick paper3 0 0- 421...

  • Page 410

    45584901th rev.1 11-107 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode image proce- ssing automatic tone correction data lastupdateddate and time nwprinter/600dpi 7352 4 thick paper2 0...

  • Page 411

    45584901th rev.1 11-108 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode image proce- ssing automatic tone correction data lastupdateddate and time nwprinter/ 1200dpi 7354 6 thick paper4...

  • Page 412

    45584901th rev.1 11-109 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode image proce- ssing user interface user custom mode setting 8303 color 0 0-4 sys 0: unused 1: text/photo base 2: t...

  • Page 413

    45584901th rev.1 11-110 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general 8518 overwriting mode for scanned files 0 0-3 sys 0: always off 1: meta scan function on / normal ...

  • Page 414

    45584901th rev.1 11-111 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general acs release factor paper size percentage 8530 0 short size 10 1-99 sys sets a percentage of each p...

  • Page 415

    45584901th rev.1 11-112 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface 8538 toner near empty notification setting 0 0-1 sys 0: disabled 1: enabled 1 08 setting mo...

  • Page 416

    45584901th rev.1 11-113 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface 8603 special usage of external options i/f 0 0-2 sys 0: none 1: usage 1 2: usage 2 1 08 set...

  • Page 417

    45584901th rev.1 11-114 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface 8704 email/faxaddress restriction 0 0-1 sys 0: no restriction 1:searchforexternalldaponly u...

  • Page 418

    45584901th rev.1 11-115 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface service notification information 8715 password for zip file with password #10481 09 - sys p...

  • Page 419

    45584901th rev.1 11-116 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface 8724 display setting of edit from address button for scan to email 1 0-1 sys 0: not display...

  • Page 420

    45584901th rev.1 11-117 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general 8750 time to wait for print image 0 0-1 sys sets whether the drum idling is executed or not when t...

  • Page 421

    45584901th rev.1 11-118 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system scanning 8767 default value of original size when scanning original put on the glass refer to contents 0-1...

  • Page 422

    45584901th rev.1 11-119 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network ipsec 8802 enable/disable setting 2 1-2 nic 1: enabled 2: disabled 12 08 setting mode system netwo...

  • Page 423

    45584901th rev.1 11-120 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system preview fax 8902 default display method 0 0-1 sys sets the default display method on the preview screen wh...

  • Page 424

    45584901th rev.1 11-121 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mfp function setting 8914 6 saveaslocalhdd from print 1 0-1 sys sets whether the function that saves data ...

  • Page 425

    45584901th rev.1 11-122 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mfp function setting 8914 17 network internetfax 1 0-1 sys setswhetherthenetworkinternetfaxfunctionis enab...

  • Page 426

    45584901th rev.1 11-123 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system depart- ment manage- ment 8926 clearing of all department counters - - sys in cases when the administrator...

  • Page 427

    45584901th rev.1 11-124 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface general languagepackage information 8970 service ui - - - displays the language package inf...

  • Page 428

    45584901th rev.1 11-125 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general scheduled automatic reboot 8981 day of the week 0 0-255 sys sets the condition and day of the week...

  • Page 429

    45584901th rev.1 11-126 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance notification ofequipment information notification setting 8991 notification setting 0 0-1 sy...

  • Page 430

    45584901th rev.1 11-127 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance notification ofequipment information error history list 8999 7 latest80items 0 0-1 sys 0: di...

  • Page 431

    45584901th rev.1 11-128 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general 9012 languageselection to be displayed at power-on english - sys en_us:englishde_de:germanfr_fr:fr...

  • Page 432

    45584901th rev.1 11-129 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance general 9059 operation switching at calibration refer to contents 0-1 sys switches whether a...

  • Page 433

    45584901th rev.1 11-130 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general 9103 time differences refer to contents 0-47 sys 0: +12.0h 1: +11.5h 2: +11.0h 3: +10.5h 4: +10.0h...

  • Page 434

    45584901th rev.1 11-131 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface power save 9114 energy saving mode 1 0-2 sys 0: off mode 1: sleep mode 2: auto mode 1 08 se...

  • Page 435

    45584901th rev.1 11-132 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface default mode setting default setting 9132 default setting of screen (function) 0 0-99 sys s...

  • Page 436

    45584901th rev.1 11-133 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface automatic sorting mode setting (radf) ppc 9150 automatic sorting mode setting (radf) 2 0-4 ...

  • Page 437

    45584901th rev.1 11-134 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface 9163 default setting of printing direction for time stamp and page number 0 0-1 sys 0: shor...

  • Page 438

    45584901th rev.1 11-135 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network retention period 9193 webdataretention period 10 3 digits sys whenacertainperiodoftimehaspassedwit...

  • Page 439

    45584901th rev.1 11-136 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system option fax 9211 default setting of pagebypage-ifax 0 0-4 sys sets the default value for the page by page o...

  • Page 440

    45584901th rev.1 11-137 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface default mode setting default setting of resolution (scn) 9218 black 1 0-5 sys 0: 150 dpi 1:...

  • Page 441

    45584901th rev.1 11-138 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface default mode setting 9226 default setting of background adjustment (gray scale) 5 19 sys 1:...

  • Page 442

    45584901th rev.1 11-139 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system image binarizing level setting (whenjudgingas black in the acs mode) 9230 2 step 0 (center) 175 0-255 sys ...

  • Page 443

    45584901th rev.1 11-140 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system data overwrite enabler 9240 hdd data overwriting type setting 3 0-3 sys select the type of the overwriting...

  • Page 444

    45584901th rev.1 11-141 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 9274 "from" address assignment method at the time of authentication 0 0-2 sys 0: user name + @ + d...

  • Page 445

    45584901th rev.1 11-142 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 9299 restriction on "to" ("cc") address 0 0-3 sys 0: no restriction 1:canbesetfrombothoftheaddress...

  • Page 446

    45584901th rev.1 11-143 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system paper feeding paper information 9302 tray 3 0 refer to contents sys 0: plain paper 1: thick paper 1 2: thi...

  • Page 447

    45584901th rev.1 11-144 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system paper feeding paper information 9304 lcf 0 refer to contents sys 0: plain paper 1: thick paper 1 2: thick ...

  • Page 448

    45584901th rev.1 11-145 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network print raw printing job 9309 paper size refer to contents refer to contents sys 1:lg 2:lt 4: st 6: ...

  • Page 449

    45584901th rev.1 11-146 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system paper feeding paper size (mpt/non- standard type) 9318 memory 1 127/64 127-356/ 64-216 sys registers the p...

  • Page 450

    45584901th rev.1 11-147 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network print 9334 pcllinefeedcode setting 0 0-3 sys setsthepcllinefeedcode. 0: automatic setting 1:cr=cr,...

  • Page 451

    45584901th rev.1 11-148 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface copy binding margin setting 9341 2 top binding front (bottom binding back) 7 0-100 sys sets...

  • Page 452

    45584901th rev.1 11-149 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile available profile display 9361 7 sh_op_07.Icc - - sys displaying the current output ...

  • Page 453

    45584901th rev.1 11-150 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile available profile display 9361 18 sh_op_18.Icc - - sys displaying the current output...

  • Page 454

    45584901th rev.1 11-151 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile available profile display 9361 29 sh_op_29.Icc - - sys displaying the current output...

  • Page 455

    45584901th rev.1 11-152 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile available profile display 9361 40 sh_op_40.Icc - - sys displaying the current output...

  • Page 456

    45584901th rev.1 11-153 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile available profile display 9361 51 sh_op_51.Icc - - sys displaying the current output...

  • Page 457

    45584901th rev.1 11-154 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9365 4 sh_op_04.000 - - sys ...

  • Page 458

    45584901th rev.1 11-155 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9365 15 sh_op_15.000 - - sys...

  • Page 459

    45584901th rev.1 11-156 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9365 26 sh_op_26.000 - - sys...

  • Page 460

    45584901th rev.1 11-157 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9365 37 sh_op_37.000 - - sys...

  • Page 461

    45584901th rev.1 11-158 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9365 48 sh_op_48.000 - - sys...

  • Page 462

    45584901th rev.1 11-159 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9369 1 sh_op_01.001 - - sys ...

  • Page 463

    45584901th rev.1 11-160 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9369 12 sh_op_12.001 - - sys...

  • Page 464

    45584901th rev.1 11-161 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9369 23 sh_op_23.001 - - sys...

  • Page 465

    45584901th rev.1 11-162 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9369 34 sh_op_34.001 - - sys...

  • Page 466

    45584901th rev.1 11-163 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general color profile displaying the attribute of the profile at the shipment 9369 45 sh_op_45.001 - - sys...

  • Page 467

    45584901th rev.1 11-164 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface email 9380 converting 1-byte katakana into 2 byte- katakana at e-mail transmission 1 0-1 sy...

  • Page 468

    45584901th rev.1 11-165 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network scanning 9388 date display format of the file name of "save as file" and email transmission 0 0-5 ...

  • Page 469

    45584901th rev.1 11-166 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network tcp/ip 9406 methodofacquiring ip address 2 1-3 nic 1: fixed ip address 2: dynamic ip address 3: dy...

  • Page 470

    45584901th rev.1 11-167 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network netware 9426 availability of bindery 1 1-2 nic 1: available 2: not available 12 08 setting mode sy...

  • Page 471

    45584901th rev.1 11-168 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network 9505 bonjour setting 1 1-2 nic 1:valid 2: invalid 12 08 setting mode system network 9514 host name...

  • Page 472

    45584901th rev.1 11-169 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network dhcp 9580 enabling server's ip addressacquiredby dhcp 1 1-2 - domain name server option (6) 1: ena...

  • Page 473

    45584901th rev.1 11-170 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance remote-controlled service 9608 destination e-mail address 3 - - sys maximum 192 letters 11 0...

  • Page 474

    45584901th rev.1 11-171 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system wireless lan 9649 wirelesslan setting 2 1-2 nic setswhetherthewirelesslanconnectionisenabledor disabled. 1...

  • Page 475

    45584901th rev.1 11-172 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance rdms general 9724 writingdataofself- diagnostic code 0 0-1 sys 0: prohibited 1: accepted 1 0...

  • Page 476

    45584901th rev.1 11-173 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network scanning 9749 wiascandriver 1 1-2 nic selectswiascandriver. 1:oki 2: microsoft 12 08 setting mode ...

  • Page 477

    45584901th rev.1 11-174 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance remote-controlled service automatic ordering function of supplies 9766 notes - - sys maximum...

  • Page 478

    45584901th rev.1 11-175 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance 9788 service call checking period setting 6 0-12 sys 0:nocheckingperiodspecified(=callsservi...

  • Page 479

    45584901th rev.1 11-176 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system version printer rom version of printer optional tray 9807 0 tray2 - 00.00.00- ff.Ff.Ff - 14 08 setting mod...

  • Page 480

    45584901th rev.1 11-177 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general 9816 addition of the page number to the multi- page file name of file 0 0-1 sys only when job is e...

  • Page 481

    45584901th rev.1 11-178 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system mainte- nance general 9843 serial number display - - sys displays the serial number of pu board. 2 08 sett...

  • Page 482

    45584901th rev.1 11-179 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system image default value setting background peak adjustment 9897 black 5 1-9 sys 1: -4 2: -3 3: -2 4: -1 5: 0 6...

  • Page 483

    45584901th rev.1 11-180 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general s-acs operation setting 9934 0 copy 1 1-9 sys 1: the number of contact control: 1 continuous color...

  • Page 484

    45584901th rev.1 11-181 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system general s-acs operation setting 9934 2 box,others 1 1-9 sys 1: the number of contact control: 1 continuous...

  • Page 485

    45584901th rev.1 11-182 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system network e-mail 9958 bcc address display on/off setting (joblog/job status) 0 0-1 sys sets whether the bcc ...

  • Page 486

    45584901th rev.1 11-183 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system user interface default setting acs original mode 9977 ppc 0 0-2 sys 0: text/photo 1: text 2: printed image...

  • Page 487

    45584901th rev.1 11-184 / oki data confidential 05/08 mode element sub element item subitem code sub- code details default value acceptable value ram contents proce- dure 08 setting mode system fax 9987 retention of fax sending settings 0 0-3 sys sets whether the fax sending settings are retained or...