Paccar MX-13 Operator's Manual - page 68
Maintenance Procedures
Full-flow Oil Filter Removal
WARNING!
Lubricating oil can cause skin irrita-
tion or skin injury. To prevent skin in-
jury, avoid unnecessary contact with
the lubricating oil. Wear protective
clothing, eye wear and gloves when
handling lubricating oil. Failure to
comply may result in personal injury.
Full-flow Oil Filter Installation
1. Lightly oil the new O-ring.
2. Install a new O-ring onto the screw
cap.
3. Install the screw cap, with the
oil filter cartridge, onto the filter
housing. Tighten the screw
cap to 354 lb-in (40 Nm). Use
a hexagonal socket to avoid
damaging the oil filter cap.
5
1. Unscrew the cap a few turns
and drain the filter housing. Use
a hexagonal socket to avoid
damaging the oil filter cap.
2. Remove the cap, with the oil filter
cartridge, from the filter housing.
Then remove the oil filter cartridge
from the screw cap.
3. Remove the O-ring from the screw
cap.
5-28