Paccar MX-13 Operator's Manual - page 75
Other manuals for MX-13:
Operator's Manual
of
111
Maintenance Procedures
Installation
1. Apply a small amount of coolant to
the sealing ring of the new coolant
filter.
2. Install the filter, rotating it
clockwise until the sealing ring
makes contact with the filter
housing. Then tighten by hand ½ -
¾ of a revolution.
3. Turn the shutoff valve to the Open
position.
4. Reinstall the radiator cap.
5. Start the engine and run at idle
speed for several minutes. Check
for leaks.
5
5-35