Pacific Energy NEO 1.6 Installation And Operating Instructions Manual - Appliance Dimensions
1.04m
1.02m
737mm
622mm
156mm
Figure 1. NEO 2.5 Dimensions
Appliance Dimensions
6
5055.900AS_120515-20
NEO 2.5
If You Suspect a Chimney Fire
Signs of a chimney fire may be one or more of the following:
1.
A roaring sound.
2.
Vibration of the chimney.
3.
Flames and sparks shooting out of the top of the chimney.
In Case of a Chimney Fire
1. Immediately close the air inlets on the stove.
2. Evacuate the home, and call the local fire department.
3. After the chimney fire has been extinguished, the chimney must be cleaned and checked for stress and cracking before
starting another fire. Also check combustibles
around the chimney and roof.
Crate Removal
1. Carefully remove wood top and supports.
2. Remove plastic cover.
3. Using a 12mm wrench, remove lag bolts that secure
hold down brackets to bottom pallet.
4. Slide the hold down brackets away from the stove.
Assembly
Side Panel Removal/Installation
1. To remove the panels, first remove the screws that secure the
panel to the rear shield. Fig. #3
2. Disengage the the tabs in the front of the panel by sliding the
panel forward away from the unit Fig. #2.
3. To install the panels, engage the tabs on the panel front
flange into the slots in the panel mounting bracket. Fig. #2
4. Attach the panel to the rear shield. Secure with two screws.
Fig. #3