Packet8 6755i User Manual - Ddi
118 — Model 6755i Series IP Phone User Guide
A
ddi
tional
Features
Using the Goodbye Key to Cancel Incoming Calls Feature
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a
specific line or for all lines. For example, if you configure the MWI LED on line 3
only, the LED illuminates if a voicemail is pending on line 3. If you configure the
MWI LED for all lines, the LED illuminates if a voicemail is pending on any line on
the phone (lines 1 through 9).
You configure the MWI indicator using the Packet8 Web Phone UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a
specific line or on all lines on the IP phone.
IP Phone UI
IF
THEN
Goodbye Key Cancels Incoming Call is
enabled AND a second call comes in while
you are on an active call,
press the Goodbye key to reject the
second incoming call.
Goodbye Key Cancels Incoming Call is
disabled AND a second call comes in
while you are on an active call,
press the Goodbye key to hang up on the
active call so you can answer the second
incoming call.
Goodbye Key Cancels Incoming Call is
disabled AND a second call comes in
while you are on an active call,
press the Ignore softkey to ignore the
second incoming call and remain on the
active call
OR
press the Answer softkey to answer the
second incoming call.
Packet8 Web Phone UI
Note: Message Waiting Indicator Line parameter is set to ALL lines by
default.