Packet8 6755i User Manual - Dition
Model 6755i Series IP Phone User Guide— 121
Ad
dition
al Fe
atu
r
es
Allow Barge In
You can configure whether or not the IP phone allows an incoming Intercom call
to interrupt an active call. The Allow Barge In parameter controls this feature.
When you enable this parameter, which is the default value, an incoming
Intercom call takes precedence over any active call, by placing the active call on
hold and automatically answering the Intercom call. When you disable this
parameter, and there is an active call, the phone treats an incoming Intercom call
like a normal call and plays the call warning tone. Allow Barge In is disabled by
default.
Configuring Incoming Intercom Settings
Use the following procedure to configure incoming Intercom call settings on the
IP phone.
1. Click on Basic Settings->Preferences->Incoming Intercom Settings.
2. The Auto-Answer field is enabled by default. The automatic answering feature
is turned on for the IP phone for answering Intercom calls. To disable this
field, uncheck the box.
3. The Microphone Mute field is enabled by default. The microphone is muted
on the IP phone for Intercom calls made by the originating caller. To disable
this field, uncheck the box.
4. The Play Warning Tone field is enabled by default. If Auto-Answer is enabled,
the phone plays a warning tone when it receives in incoming intercom call. To
disable this field, uncheck the box.
5. The Allow Barge In field is disabled by default. If Allow Barge In is enabled,
the phone puts an active call on hold and answers the incoming Intercom call.
To enable this field, check the box.
6. Click
to save your settings.
Packet8 Web Phone UI
Note: If the Auto-Answer field is not checked (disabled), the phone rejects
the incoming Intercom call and sends a busy signal to the caller.