Packet8 6755i User Manual - Line Keys
Model 6755i Series IP Phone User Guide— 65
Line Keys,
Pro
g
ra
mmab
le Keys,
and Softkeys
Click on Operation->Expansion Module
2. For softkeys, select from "Key 1" through "Key 20" or for programmable keys,
select from "Key 1" through "Key 6".
3. In the Type field, select None.
4. If configuring a softkey on the Bottom Keys, in the state fields, check (enable)
or uncheck (disable) the states you want to apply to this softkey.
5. Click
to save your changes.
Empty Key (softkeys only)
You can set a softkey to force a blank entry on the IP phone display for a specific
key. You do this by setting the softkey to empty. The keys are added in order
(from key 1 to key 20) after any hard-coded keys have been added. If a particular
key is not defined, it is ignored.
Setting an Empty Key
Use the following procedure to configure an Empty softkey on the
6757i IP Phone.
1. Click on Operation->Softkeys and XML.
or
Packet8 Web Phone UI