Packet8 6755i User Manual - Line
62 — Model 6755i Series IP Phone User Guide
Line
Keys
, Programm
ab
le
Keys,
and Softkeys
Setting Callers List Key
Use the following procedure to configure a Callers List key on the 6755i IP
Phone. The procedure shows the programmable key screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module
2. For softkeys, select from "Key 1" through "Key 20" or for programmable keys,
select from "Key 1" through "Key 6".
3. In the Type field, select Callers List.
4. In the Label field, enter a label to apply to this key.
5. If configuring a softkey on the Bottom Keys, in the state fields, check (enable)
or uncheck (disable) the states you want to apply to this softkey.
6. Click
to save your changes.
Packet8 Web Phone UI
Note: By default, Key 3 on the top set of programmable keys is configured
for Callers List.