PACOM SmartIP-16PD User Manual - page 13
Part 1 – Introduction
13
9 LEDs
t Power LED: Lights up while the main unit is in
operation.
t
Network LED: Flashes when the main unit is
linked to an ethernet.
t
HDD LED: Flashes when data is being written
on the HDD or a video search is in progress.
t
eSATA LED: Lights up when the main unit is
connected to an eSATA device.
t
Panic LED: Flashes in red when Panic Recording
is in progress.
t
Alarm LED: Lights up in red when an alarm
event occurs.
0 USB Ports
t Storage Device Connection
Connect an external USB hard drive or a USB flash
memory device to one of the USB ports for use with
the Clip Copy feature. The external storage device
should be placed as close to the NVR as possible.
It is recommended that you use a connection
cable that is no longer than 180cm in length. Use
the connection cable included with your external
storage device to connect the device to one of NVR's
USB ports. For more information Clip Copy, refer to
the Clip Copy on page 78.
t Peripheral Device Connection
Use the USB ports to connect peripherals such as a
USB mouse to the NVR. You can also use a USB-to-
serial converter and connect multiple text-in devices
to the NVR at the same time.
For USB flash memory devices, the NVR supports
the FAT32 file format only.
Connections on the Front Panel
Flash Memory
Mouse
USB HDD
IR Remote Control