PACOM SmartIP-16PD User Manual - page 32

Part 2 - Getting Started

32

PTZ Control

While in Live mode, right-click and select PTZ from the 

context menu or press the PTZ button on the NVR's 

front panel or remote control to display the PTZ camera 

selection window.

Select the camera you wish to control. The 

 icon will 

begin to flash on the selected camera's OSD window.

Use the Arrow buttons to pan and tilt the camera up, 

down, left, and right.

Use the 

 and 

 buttons to zoom in/out.

Use the

 and 

 buttons to shift focus from 

nearby to far and vice versa. 

Use the 

 button to load the preset window.

Use the 

 button to save current position as a 

preset.

You can also change the direction by dragging on the 

mouse. 

Also, it's possible to use the mouse wheel to zoom in/

out.

t Logging in with an account that has PTZ Control 

Authority is necessary in order to control PTZ 

cameras.

t A message will prompt if there is no PTZ camera 

displayed on the Live screen.

t Zoom in/out and shift focus using the PTZ Control 

(ZOOM, FOCUS) buttons on the remote control.

t To exit PTZ mode, press the PTZ button again.

Setting Up a PTZ Preset

While in PTZ mode, select the VIEW button on the 

remote control to display the Set Preset window and 

assign the current position as a preset.

While in PTZ mode, select the SAVE button on the 

remote control to display the Move to Preset window. 

Select a preset to move the current PTZ camera to the 

selected preset's position.