PACOM SmartIP-16PD User Manual - page 54
Part 3 - Configuration
54
t Limit Time-Lapse Recording: You can store event
recording data for longer. If you do not wish to use
Limit Time-Lapse Recording, select Never. This
function is activated when data has been stored for
longer than as configured because the recording
disk has sufficient capacity and saves new data by
overwriting Time Lapse Recording data that are
older than as specified under Recycle mode.
t If the recording stored on the disk is shorter than
the duration specified under Limit Time-Lapse
Recording, the older of Event Recording or Time
Recording data is deleted first.
t The system's recording time may change depending
on recording quality, resolution, motion, and other
configurations made by the user. The duration
specified under Limit Time-Lapse Recording may
not be guaranteed in certain situations.
t Recording Failover Service: If the network goes
down, this feature will transfer temporary data stored
in the camera's buffer to the NVR when the network
goes online again.
t Use Panic Recording: Enable/disable Panic
Recording.
t Panic Recording Duration: Disable Panic Recording
automatically. Select between 5 mins and 1 hr. If you
do not wish to disable the feature automatically,
select No Limit.
t Video Profile: Select a recording profile value for
Panic Recording.
Schedule
Disabling Schedule On suspends schedule recording
regardless of the schedule and displays the
icon on
the upper left corner of each camera screen. Pressing
the Panic Record button displays the
icon and
commences panic recording.
Set Record Schedule mode as Simple Mode or
Advanced Mode. Advanced Mode allows you to
configure a unique recording schedule for each event.
Select the
icon to delete a schedule.
t Changing the recording schedule mode suspends
all active event-linked actions.
t Select the + button on the bottom left of the screen
to add a schedule. Select Day to specify the Day
setting or select All. Select Scope to specify the
time frame.