PACOM SmartIP-16PD User Manual - page 31
Part 2 - Getting Started
31
Full Sequence
Displays all channels in sequence while in Live mode
(single and split screen settings). In order to use the Full
Sequence feature, Full Sequence (Display Setup - Main
Monitor > Sequence) must first be enabled.
e.g.) Full Sequence in 2x2 split screen mode
1
5
9
13
1
3
7
11
15
3
2
6
10
14
2
4
8
12
16
4
Cameo Sequence
In Cameo Sequence mode, only the bottom right
screen in a split screen setup changes sequence. In order
to use the Cameo Sequence feature, Cameo Sequence
(Display Setup - Main Monitor > Sequence) must first be
enabled.
e.g.) Cameo Sequence in 2x2 split screen mode
1
1
1
1
1
1
3
3
3
3
3
3
2
2
2
2
2
2
4
5
6
15
16
4
t If using the Full Sequence setting, page numbers
appear on the system status area on the upper right
part of the screen, next to the Sequence icon.
t Pages are skipped under the following
circumstances:
– If all cameras included in the page are
deactivated.
– If there are no video signals.
– If the page contains "covert" cameras.
– If the user does not have permission to view
feeds from the cameras.
9 Select Camera
Displays the selected camera in a single screen
format.
0 Search Mode
t Time-Lapse Search: Select Search Mode > Time-
Lapse Search to search for and play back saved
data directly from the record table.
t Event Log Search: Select Search Mode > Event
Log Search to search for event logs and play back
associated event recordings.
! Setup
Used to access the Setup menu.
@ Wizard
Running the Wizard lets you configure basic settings
required for operating the system.
# Status Indication
Displays system status icons.
Status Indication
Indicates remote control receptivity.
Indicates connection to the NVR from a
remote program.
Indicates two-way audio connection.
Indicates a zoomed in state.
Indicates Freeze is in use.
Indicates Sequence is in use.
1/4
Indicates the current screen's group.
Indicates an event monitoring.
Indicates HDD use. The icon to the left
is shown if using the overwrite setting.
Otherwise, remaining HDD space is shown as
a percentage value.
Zoom
Press the ZOOM button on the remote control and
select a channel you wish to zoom in on. A zoom frame
will appear on the selected channel. Use the arrow
buttons to position the frame. Press the Play/Pause
button to cycle through various zoom factors. When
Zoom is activated,
icon is on the status bar located
on the upper right corner of the system.
t In Full Screen mode, activating Zoom automatically
selects the current channel.
t To restore the channel to normal size, press the
Zoom button again.