PACOM SmartIP-16PD User Manual - page 27
Part 2 - Getting Started
27
Go To Camera
Moves the focus automatically to the camera using MAC
address of camera in the camera list.
Auto Detection
Activated in Live mode. Automatically notifies the user of
unregistered DirectIP™ camera connections.
Camera View Buttons
t ALIGNMENT
Button: Realigns camera screens
displayed on the video display area in the order of
Video In port connections.
t RESET
Button: Refreshes the video display area and
the camera list.
Selecting RESET clears all scanned devices from the
list.
t TOOL Button: The network camera tools window
appears and you will be able to change the camera
protocol.
The camera protocol has to be set to DirectIP
to register in NVR. Select the camera Protocol
displayed by SiRiS to set DirectIP.
Changing the protocol restarts the camera and
registers the camera to NVR to use it. For more
information on settings, refer to the network
camera's user manual.
Camera List Area
1
2
3
4
Registered
Screen
No display
Screen
display
Initial registration
Initial registration
other NVRs
(Registration X)
other NVRs
(Registration X)
1 Screen Position/Registration Status: Identifies the
camera's position in the video display area. A blue
background indicates a camera that is available for
registration. A grey background indicates an already
registered camera. Other registered cameras are
shown in black background.
2 Model: Indicates the camera's model.
3 MAC: Displays the last 6 digits of the camera's MAC
address.
4 Title: Indicates the camera's name. Changing a
camera's name in the video display area updates the
camera list as well.
Following options can be accessed by right-clicking on a
camera list entry:
t Add/Remove Camera: Adds or removes the selected
camera. The Add Camera option is inactive if the
camera has already been added to the screen.
t Authentication: Enter the necessary camera login info.
This option is inactive for DirectIP™ cameras because
they do not require logins.