QMS Magicolor 2 Desklaser User Manual - page 120
Other manuals for Magicolor 2 Desklaser:
Supplementary Manual, Supplementary Manual, Install Manual, Supplementary Manual, Quick Setup Manual
Manual is about: Konica Minolta Magicolor 2 Desklaser: User Guide
of
276
*#=
'/
5
Make sure that the hole in each
metal bracket is lined up with the
corresponding hole on the input
feeder.
6
Use the thumbscrews to attach the
two brackets to the lower input
feeder.
7
Remove the lower input feeder
cover plate. You will switch this
cover plate with the one from the
printer after the cables have been
connected.
8
Locate the cable at the left rear of
the optional feeder, and connect it
to the printer.
9
Reinsert the two cover plates.
6
7
9
6
7