QMS Magicolor 2 Desklaser User Manual - page 45
%($$
)*3!42
.&
)$*.&
0
!.!
»
Note:
Changes you make here apply to all documents. However, any changes you
make through your application (Document Properties settings) override the Default
Document Properties settings.
1
Open the printer driver.
a
From the Windows NT Start menu choose Settings.
b
From the Settings menu choose Printers.
c
In the Printers window, select the QMS
magicolor
2
DeskLaser printer icon.
2
From the File menu choose Default Document Properties.
Three tabs appear in the QMS
magicolor
2 DeskLaser Default Document
Properties window:
Paper—Allows you to provide information about the type and location of
the media you want to print on. See “Configuring Paper Options” on page
2-29.
Quality—Allows you to provide information about halftoning and resolu-
tion of the printing. See “Configuring Quality Options” on page 2-35.
Image Settings—Allows you to provide settings for color format, image
brightness and contrast, color balance, and color matching. See “Config-
uring Image Settings Options” on page 2-38.
3
Make your selections, and then choose OK to save your changes and return
to the Printers window.
!
»
Note:
Any changes you make here apply only to the current document. These
changes override any settings you made through the Default Document Properties
window.
1
From the application’s File menu choose Print (or, in some cases, Print
Setup).
2
In the Print or Print Setup dialog box, select the QMS
magicolor
2
DeskLaser.