QMS Magicolor 2 Desklaser User Manual - page 147
%$.
/0
3
Open the printer’s front cover.
Squeeze the latch near the upper-right
corner of the cover.
Caution:
This is necessary, as it pulls the
toner cartridges forward slightly to make
room for the OPC belt cartridge. You could
damage the OPC belt if you don’t
do this.
»
Note:
The illustrations for steps 3 through
16 show the printer without the duplexer.
However, the instructions are the same for
both models.
4
Pull the latch to release the top cover,
and then open the top cover.
Caution:
If you have a duplex model,
make sure you have opened the
duplexer’s rear cover first. Forced opening
of the top cover first may damage the unit.
5
Release the OPC belt cartridge lock
levers (one on each side of the OPC
belt cartridge opening).
»
Note:
The white powder lubricant on a
OPC belt is normal; it won’t affect quality.