QOLSYS IQ PANEL Installation Manual - Iq Door/window Sensor
© America’s Best Alarms, 2014
IQ DOOR/WINDOW SENSOR
MOUNTING INSTRUCTIONS
Mounting with provided adhesive
• Remove backing one one side of the large double-sided tape and stick the exposed side on the back of
the sensor as shown.
• Remove the other side of the large double- ‐sided tape and mount the device according to the
installation instructions.
• Remove the backing one side of the small double- ‐sided tape and place on back of magnet.
• Lineup the magnet with the sensor using the arrows shown on each device respectively. Ensure the
sensor and magnet are not separated more than 0.4 inches as shown.
• Remove the second side of the double- sided tape and secure the magnet.
Mounting with provided hardware
• Remove the back of the sensor by pressing on the tab and pulling the cover off.
• Place the base of the sensor on the appropriate surface and use the 4 supplied screws to secure the
mounting plate to the chosen location.
• To secure the magnet, remove the backing on one side of the the small adhesive strip and place on the
back of the magnet or secure with screws.
• Line up the magnet with the sensor using the arrows. Ensure the sensor and magnet are not separated
more than 0.4 inches.
• Remove the second side of the double- ‐sided tape and secure the magnet to the chosen location.