QOLSYS IQ PANEL Installation Manual

IQ DOOR/WINDOW- INSTALLATION MANUAL

QOLSYS CONFIDENTIAL AND PROPRIETARY  PAGE 1 OF 6

© Last revised 2/27/15 All rights reserved

The Qolsys IQ Door/Window is a sleek, high-

performance wireless sensor that detects opening 

and closing of doors, windows and anything else 

which opens and closes (drawers, cabinets, etc). It 

works seamlessly with the Qolsys IQPanel.

1 Door/Window Sensor

1 Magnet

6 screws

1 large strip of double sided adhesive

1 small strip of double sided adhesive

PRODUCT FEATURES

PARTS INCLUDED

IQ DOOR/WINDOW

Wireless signal range: 600ft (200M),open air. 

Code outputs: tamper, tamper restore, alarm (primary open), 

alarm restore (primary close), external alarm (secondary 

wired open), external restore (secondary wired closed), low 

battery.

Transmitter frequency : 319.5MHZ  

Unique code ID

Supervisory keep-alive interval: 70 minutes. 

RF output power 91.1dBuV +/- 5% at 3m

TECHNICAL SPECIFICATIONS

•Low profile 

•Supports one or two doors, windows, etc.  

•Primary wireless magnet contact and secondary wired 

contact

•Internal or external reed switch

•Easy, wire-free installation 

•Secondary (optional) sensor (external wired Door/Window  

sensor) 

•Advanced circuit technology resulting in ultra-low power 

consumption

•Easy to install Batteries

•Over 5 years of battery life

•Tamper Detection

•Supervisory health messaging

•Sensor Open and Close detection