QTech QSW-2800 series Configuration Manual - 28.6 Dhcpv6 Configuration
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
205
28.6 DHCPv6 Configuration
Examples
Example1:
When deploying IPv6 networking, the switch can be configured as DHCPv6 server in order to
manage the allocation of IPv6 addresses. Both the state and the stateless DHCPv6 are
supported.
Topology:
The access layer use Switch1 switch to connect users of dormitory buildings and it is
configured as DHCPv6 relay delegation; Switch3 is configured as DHCPv6 server in
secondary aggregation layer, and connected with backbone network or higher aggregation
layers; The Windows Vista which be provided with DHCPv6 client must load on PC.
Usage guide:
Switch3 configuration:
Switch3>enable
Switch3#config
Switch3(config)#service dhcpv6
Switch3(config)#ipv6 dhcp pool EastDormPool
Switch3(dhcpv6-EastDormPool-config)#network-address
2001:da8:100:1::1
2001:da8:100:1::100
Switch3(dhcpv6-EastDormPool-config)#excluded-address 2001:da8:100:1::1