QTech QSW-2800 series Configuration Manual - 3.3 Examples of Cluster
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
43
6. Manage cluster network with web
7. Manage cluster network with snmp
3.3 Examples of Cluster
Administration
Scenario:
The four switches SW1-SW4, amongst the SW1 is the command switch and other switches
are member switch. The SW2 and SW4 is directly connected with the command switch, SW3
connects to the command switch through SW2.
used to remotely upgrade the member switch.
It can only upgrade nos.img file.
Command
Explanation
Global Mode
ip http server
Enable http function in commander switch and member
switch.
Notice: must insure the http function be enabled in member
switch when commander switch visiting member switch by
web. The commander switch visit member switch via beat
member node in member cluster topology.
Command
Explanation
Global Mode
snmp-server enable
Enable snmp server function in commander switch and
member switch.
Notice: must insure the snmp server function be enabled in
member switch when commander switch visiting member
switch by snmp. The commander switch visit member
switch via configure character string community>@sw E1 E1 E1 E1 E2 E2 SW1 SW2 SW3 SW4