Quantum ATL M1500 User Manual - page 12
Quantum ATL M1500 User’s Guide Addendum - FC310 Router Option
Document 6421018-02, Ver. 2, Rel. 0
September 2002
12
Commonly Used FC310 Services Software Commands for the ATL M1500 Library
Table 2 Commonly Used
FC310 Services
Commands
Command
Description
Default
Syntax
RouteDisplay
List the currently mapped Fibre
Channel-to-SCSI routes.
routedisplay
routedisplay [fp]
routedisplay [online | offline]
routedisplay [fp [fl] ]
routedisplay [fp [online |
offline] ]
SerialPortBaudRate
Set the baud rate for the FC310
serial port (2400, 9600, 19200,
38400, 57600, or 115200).
9600
set serialportbaudrate [rate]
get serialportbaudrate
SerialPortEcho
Turn on or off the echoing of
keyboard input.
off
set serialportecho [enabled |
disabled]
FirmwareRestart
(Immediate)
Reboot the FC310 firmware.
firmwarerestart
Zmodem (Immediate)
Transfer a firmware image or
NVRAM parameter file to or from
the router using ZMODEM file
transfer protocol.
zmodem [send [filename] |
receive]
Info (Immediate)
Displays version numbers and
other product information for key
components within the FC310.
info
Help (Immediate)
Displays a list of available
commands. When the optional
command name is present,
detailed command-specific
information is displayed.
help [command name]
SaveConfiguration
(Immediate)
Save the new configuration. If a
firmware restart is required to
make the change, the user is
prompted to confirm the restart.
The user can override the
confirmation request by indicating
the override value on the
command line.
saveconfiguration
norestart >