Quantum ATL M1500 User Manual - page 19
Quantum ATL M1500 User’s Guide Addendum - FC310 Router Option
Document 6421018-02, Ver. 2, Rel. 0
September 2002
FC310 Services Software Commands
19
LogEvent
Sets the switches which control the filtering performed when
logging events. The switches have the following meanings and
settings:
(enabled | disabled) switch: controls whether or not events
logging is enabled or disabled.
(subsystem) switch: same as switch for DispEvent in previous
section
(event_level) switch: same as switch for DispEvent in previous
section
(status) switch: same as switch for DispEvent in previous
section
disabled
3Fh
3Fh
all
set logevent [enabled |
disabled] | [ [subsystem]
[event_level] [status] ]
get logevent
ClearEvent (Immediate)
Clears the contents of the event
log.
clearevent
DisplayEvent (Immediate)
Displays the current contents of
the event log. The log is filtered by
the current switch settings as
described in the DispEvent
section. If the optional all is
selected, the display filtering is
temporarily suspended and all
logged events are displayed.
displayevent
Info (Immediate)
Displays version numbers and
other product information for key
components within the FC310.
info
Help (Immediate)
Displays a list of available
commands. When the optional
command name is present,
detailed command-specific
information is displayed.
help [command name]
RestoreConfiguration
(Immediate)
Restore to factory default
configuration or the last saved
configuration. The new
configuration must be saved to
take effect.
restoreconfiguration [default |
saved]
Command
Description
Default
Syntax