Quantum ATL M1500 User Manual - page 20
Quantum ATL M1500 User’s Guide Addendum - FC310 Router Option
Document 6421018-02, Ver. 2, Rel. 0
September 2002
20
FC310 Services Software Commands
SaveConfiguration
(Immediate)
Save the new configuration. If a
firmware restart is required to
make the change, the user is
prompted to confirm the restart.
The user can override the
confirmation request by indicating
the override value on the
command line.
saveconfiguration
norestart >
Reserve (Immediate)
Reservation of the FC310 is implicit; once the configuration
image is changed by any user of services (Serial/Ethernet/
Etc.,) the FC310 becomes RESERVED. Performing a
SaveConfiguration, RestoreConfiguration or FcRestart
RELEASES the FC310 so that other devices may access it.
When the FC310 services interface is reserved, set commands
are unavailable, but get commands are available. Note that at
least one service interface always has access to the FC310 at all
times. This interface always reports a RELEASED status, since
it may issue set commands.
reserve
VerboseMode
Sets the Command Line Interface to display extended
information about a parameter when the help command is
given. When verbose mode is enabled, parameter values are
generally preceded by labels in responses to the get commands.
Only the parameter value is output when verbose mode is
disabled.
set verbose [enabled |
disabled]
get verbose
Command
Description
Default
Syntax