Raleigh Pedelec Groove 2.0 User Manual - 9  The Motor

20  

Original User Manual | Groove 2.0

8.4   VEL  (speed), 

ODO (total kilometres) 

and DST (trip distance)

When you switch the Groove 2.0 on, the display automati-

cally shows VEL (the current speed). Hold 

SET

 down for a 

second to change the display over to ODO (total kilome-

tres). Hold 

SET

 down again for 1 second, in order to change 

over to DST (trip distance). When you press 

SET

 briefly 

again, you return once more to VEL (the current speed). 

The selected mode has a black line under it:   The dis-

The dis-

play of the values changes, according to what mode you 

are in.

8.4.1  Resetting the trip distance (DST)

Stop when you want to change the settings. Lack 

of attention in traffic can lead to accidents. 

Select DST (trip distance) with 

SET

. Press 

MODE

 +   for two 

seconds in order to reset the DST (trip distance) to 0 km.

ODO (total kilometres) cannot be reset. On reach-

ing 99999 KM, the Groove 2.0 system returns 

automatically to 0 KM.

8.5  Adjusting the back-lighting

1.  Switch the battery on. 

2.  Press the   button. The back-lighting of the display 

can only be adjusted when switched on. 

3.  Hold 

SET

 +

MODE

 down simultaneously for three seconds. 

The abbreviation "bl" appears on the display, along 

with the current brightness value (1, 2 or 3).

1

Little light

2

Medium light

3

Maximum brightness

4.  Use 

SET

 and 

MODE

 to choose the value you want. 

5.  When you have made your decision, hold the   button 

down for three seconds.

8.6  Battery charge indicator

The battery charge indicator shows how much charge is 

available in the form of a stylised battery. The lower the 

charge state of the battery, the fewer black segments can 

be seen. 

9  The motor

9.1   Operation

If you switch on the assistance and start pedalling, the 

motor starts up once the cranks have completed about one 

quarter of a revolution.

The level of thrust delivered by the motor depends on:

• 

which level of assistance you have selected. 

At the highest assistance level (Power) the motor 

helps you with the maximum power (250 watts), and 

up to the maximum permitted speed of 25 km/h. How-

ever it does then use the most energy. If you ride at 

the 

Sport

 assist level, the motor produces slightly less 

power (150 watts). If you have selected 

Economic

, 

you receive the least amount of assistance (70 watts), 

but have the battery’s maximum range at your dispos-

al. Each assistance mode supports you up to different 

switch-off speeds. This function lets you adjust to the 

speed of other riders (e.g. in a group).