SAB Goblin 700 Manual - page 27

Servo Spacer

(H0075-S)

Carbon Rod Assembly

(HC239-S)

Socket Head Cap 

Screw M2x6mm

(HC004-S)

Tail Servo Assembly

15-16mm

The distance between 

the axis and the ball must 

be between 15-16 mm

Uniball M2 5H6

(H0064-S)

Tail Servo

The tail servo wire lead must not be allowed to move 

above this line (figure 1). To ensure this, it is necessary to 

position it and then secure with hot glue in the area 

indicated by the arrow.  Figure 2 shows the installed servo.

            Note: 

Please note that the boom edges might be      

            rough and can eventually chafe or cut your tail servo 

            lead - we recommend protecting the leads with heat  

            shrink or even electrical tape.

Socket Head Cap

Screw M2.5x12mm

(HC026-S)

BAG 15

Page 25

Chapter 12, Tail Servo Installation